(1) Advances and trends in boundary element methods.

Cruse_TA, ODonoghue_PE, Raveendra_ST, Atluri_SN

Soviet Microelectronics (English Translation of

Mikroelektronika), 1989, pp.49-70

(2) On the crack growth of single edge cracked plate with adhesive-

bonded reinforcement.

Hu_YQ, Li_PN, Ju_DY

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1990, Vol.196, pp.61-66

(3) Thin conductive beam bending modelling.

Ren_Z, Razek_A

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.290-292

(4) Solution of the 'asymmetrical conductor with a hole' problem by

the boundary integral equation method.

Ishibashi_K

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.245-247

(5) Solution of team workshop problem 7 (asymmetrical conductor

with a hole) using the IGTE BEM code.

Richter_KR, Rucker_WM

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.215-217

(6) Eddy current calculation of the team workshop problem 7 by

boundary element method.

Tsuboi_H

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.209-211

(7) Parallel computation of 3-D nonlinear eddy currents by the

Boundary Element Method (BEM) and the Fast Fourier Transform

(FFT).

Kost_A, Shen_J

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.181-184

(8) Computation of open boundary eddy current field caused by large

transformers low-voltage leads using BEM.

Tang_R, Wang_S, Zhang_H

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.159-162

(9) On the numerical solution of a 3-D magnetostatic scattering

problem by boundary integral equation methods.

Neubauer_A

COMPEL - The International Journal for Computation and

Mathematics in Electrical and Electronic Engineering, 1990.,

Vol.9, No.Suppl A, pp.147-150

(10) Boundary element method for fluid-structure interaction

problems in liquid storage tanks.

Hwang_IT, Ting_K

Journal of Pressure Vessel Technology, Transactions of the

ASME, Nov 1989., Vol.111, No.4, pp.435-440

(11) Boundary element methods in three-dimensional thermoelasticity.

Dargush_GF, Banerjee_PK

International Journal of Solids and Structures, 1990, Vol.26,

No.2, pp.199-216

(12) Two-dimensional transient wave-propagation problems by time-

domain BEM.

Israil_ASM, Banerjee_PK

International Journal of Solids and Structures, 1990, Vol.26,

No.8, pp.851-864

(13) Boundary element analysis of crack growth for mixed-mode center

slant crack problems.

Ghorbanpoor_A, Zhang_J

Engineering Fracture Mechanics, 1990, Vol.36, No.5, pp.661-668

(14) Shape optimization of structures to minimize stress

concentration.

Xu_C, Yu_M

Computers and Structures, 1990, Vol.36, No.3, pp.491-497

(15) Boundary element analysis on galvanic corrosion problems.

Computational accuracy on galvanic fields with screen plates.

Miyasaka_M, Hashimoto_K, Kishimoto_K, Aoki_S

Corrosion Science, 1990, Vol.30, No.2-3, pp.299-311

(16) Shape optimization of conductor slab on an electromagnetic

damper by boundary element method combined with finite element

method.

Kanamori_M, Ishihara_Y

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jul 1990, Vol.56,

No.527, pp.1698-1703

(17) Der elastisch-plastische Querpressverband bie verschiedenen

Fliessgrenzen von Innen- und Aussenteil.

The elastic-plastic shrink fit with different yield limits of

shaft and hub.

Gamer_U

Forschung im Ingenieurwesen, Sep 1990, Vol.56, No.5, pp.166-168

(18) Method for determining appropriate dimensions of permanent

magnet of HB-type stepping motors.

Takura_T, Onuki_T

Electrical Engineering in Japan (English translation of Denki

Gakkai Ronbunshi), Aug 1990, Vol.110, No.1, pp.129-138

(19) Biharmonic analysis of rectilinear plates by the boundary

element method.

Camp_CV, Gipson_GS

International Journal for Numerical Methods in Engineering, Aug

20 1990, Vol.30, No.3, pp.517-539

(20) Boundary element method analysis of stationary thermoelasticity

problems in non-homogeneous media.

Sladek_J, Sladek_V, Markechova_I

International Journal for Numerical Methods in Engineering, Aug

20 1990, Vol.30, No.3, pp.505-516

(21) Analytical integrations in boundary elements.

Takhteyev_V, Brebbia_CA

Engineering Analysis, Jun 1990, Vol.7, No.2, pp.95-100

(22) Boundary element analysis of ion extraction systems.

Igarashi_H, Shirakawa_S, Honma_T

Engineering Analysis, Jun 1990, Vol.7, No.2, pp.90-94

(23) Consideration on identification method of residual stresses by

boundary element method.

Koguchi_H, Yada_T

Engineering Analysis, Jun 1990, Vol.7, No.2, pp.66-72

(24) Crack identification by the electric potential CT inverse

analyses incorporating optimization techniques.

Sakagami_T, Kubo_S, Ohji_K

Engineering Analysis, Jun 1990, Vol.7, No.2, pp.59-65

(25) Effect of reinforcement factors on fatigue limit of welded

joint.

Terasaki_T, Akiyama_T, Nakamura_I, Tanaka_H

Zairyo/Journal of the Society of Materials Science, Japan, Jul

1990, Vol.39, No.442, pp.921-926

(26) Dynamic response of two-dimensional flexible foundations

allowed to uplift.

Abascal_R, Dominguez_J

Computers and Geotechnics, 1990, Vol.9, No.1-2, pp.113-129

(27) Foundation uplift and radiation damping effects calculated in

the Laplace domain.

Schmid_G, Hillmer_P

Computers and Geotechnics, 1990, Vol.9, No.1-2, pp.101-112

(28) Analysis of electromagnetic field distribution in tunnels by

the boundary-element method.

Sakai_K, Koshiba_M

IEE Proceedings, Part H: Microwaves, Antennas and Propagation,

Aug 1990, Vol.137, No.4, pp.202-208

(29) Effective direct solution method for certain boundary element

equations in 3D.

Meyer_A, Rjasanow_S

Mathematical Methods in the Applied Sciences, Jul 1990, Vol.13,

No.1, pp.43-53

(30) H-p version of the boundary element method with geometric mesh

on polygonal domains.

Babuska_I, Guo_BQ, Stephan_EP

Computer Methods in Applied Mechanics and Engineering, Jun

1990., Vol.80, No.1-3, pp.319-325

(31) Numerical investigation of wave interactions in dielectric

waveguides with periodic surface corrugations.

Hadjicostas_G, Butler_JK, Evans_GA, Carlson_NW, Amantea_R

IEEE Journal of Quantum Electronics, May 1990, Vol.26, No.5,

pp.893-902

(32) Capacitance of a strip capacitor.

Nishiyama_H, Nakamura_M

IEEE Transactions on Components, Hybrids and Manufacturing

Technology, Jun 1990, Vol.13, No.2, pp.417-423

(33) On inverse analysis technique to obtain contact stress

distributions. (Analysis using experimental data and

evaluation).

Oda_J, Moto_S

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jun 1990, Vol.56,

No.526, pp.1479-1484

(34) Land subsidence due to gas/oil production in inhomogeneous

transversally anisotropic half-space by a boundary element

method.

Sartoretto_F, Gambolati_G, Rinaldo_A

International Journal for Numerical and Analytical Methods in

Geomechanics, Aug 1990, Vol.14, No.6, pp.379-399

(35) Miniature electrostatic motor.

Fujimoto_A, Sakata_M, Hirano_M, Goto_H

Sensors and Actuators, A: Physical, May 1990, Vol.24, No.1,

pp.43-46

(36) Study on application of three-dimensional boundary element

method in analysis of ground excavation.

Kadota_S

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Jun 1990, No.418 pt 3-1, pp.133-142

(37) Fundamental study for direct measurement of maximum principal

stress by hydraulic fracturing.

Sakuma_S, Kikuchi_S, Araki_Y, Mizuta_Y

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Jun 1990, No.418 pt 3-1, pp.105-114

(38) Improved formulation for acoustic eigenmode extraction from

boundary element models.

Coyette_JP, Fyfe_KR

Journal of Vibration, Acoustics, Stress, and Reliability in

Design, Jul 1990, Vol.112, No.3, pp.392-397

(39) Two-dimensional radiation and scattering at short wave length.

Yoon_WS, Park_JM, Eversman_W

Journal of Vibration, Acoustics, Stress, and Reliability in

Design, Jul 1990, Vol.112, No.3, pp.384-391

(40) Generalized axisymmetric elastodynamic analysis by boundary

element method.

Wang_HC, Banerjee_PK

International Journal for Numerical Methods in Engineering, Jul

1990, Vol.30, No.1, pp.115-131

(41) On the use of infinite elements in the analysis of two-

dimensional layered elastic systems via discretized integral

equations.

Jommi_C, Novati_G

Computers and Geotechnics, 1989, Vol.8, No.4, pp.269-288

(42) Numerical simulation of a cathodically protected

semisubmersible platform using the PROCAT system.

Telles_JCF, Mansur_WJ, Wrobel_LC, Marinho_MG

Corrosion (Houston), Jun 1990, Vol.46, No.6, pp.513-518

(43) Amplification of elastic waves by a three dimensional valley.

Part 2. Transient response.

Mossessian_TK, Dravinski_M

Earthquake Engineering & Structural Dynamics, Jul 1990, Vol.19,

No.5, pp.681-691

(44) Amplification of elastic waves by a three dimensional valley.

Part I. Steady state response.

Mossessian_TK, Dravinski_M

Earthquake Engineering & Structural Dynamics, Jul 1990, Vol.19,

No.5, pp.667-680

(45) Coupled finite and boundary element method in electromagnetic

problems.

Wu_KL, Delisle_GY, Fang_DG

Canadian Journal of Electrical and Computer Engineering, May

1990, Vol.15, No.2, pp.56-62

(46) Shape optimization analysis. First - and second-order necessary

conditions.

Cabuk_H, Modi_V

Optimal Control Applications & Methods, Apr-Jun 1990, Vol.11,

No.2, pp.173-190

(47) Free-vibration analysis of three-dimensional solids by BEM.

Wilson_RB, Miller_NM, Banerjee_PK

International Journal for Numerical Methods in Engineering, Jun

1990, Vol.29, No.8, pp.1737-1757

(48) Boundary elements in zoned media. Direct and indirect methods.

Medina_DE, Lean_MH, Liggett_JA

International Journal for Numerical Methods in Engineering, Jun

1990, Vol.29, No.8, pp.1727-1735

(49) Boundary oriented domain quadrature technique for arbitrary

multiply-connected regions.

Camp_CV, Gipson_GS

Advances in Engineering Software, Jan 1990, Vol.12, No.1,

pp.27-38

(50) Application of the CVBEM to multiply connected regions.

Hromadka_TVI

Applied Mathematical Modelling, Apr 1990, Vol.14, No.4, pp.212-

216

(51) Scattering of sound from a pair of finite cylinders. A

preliminary study applicable to sound intensity technique.

Lin_M

Chinese Journal of Acoustics, Jul-Sep 1989, Vol.8, No.3,

pp.261-271

(52) Electronic package thermal design using boundary elements.

Liu_JC, Hunter_DE, Kozarek_RL

Proceedings - IEEE Semiconductor Thermal and Temperature

Measurement Symposium, 1990, No.Feb 1990., pp.65-69

(53) Local and global accuracy estimates for boundary element

analysis.

Rencis_JJ, Hopkins_DA, Chamis_CC

Collection of Technical Papers - AIAA/ASME/ASCE/AHS Structures,

Structural Dynamics & Materials Conference, 1990, No.2,

pp.1002-1009

(54) Parallel computation using boundary elements in solid

mechanics.

Chien_LS, Sun_CT

Collection of Technical Papers - AIAA/ASME/ASCE/AHS Structures,

Structural Dynamics & Materials Conference, 1990, No.2, pp.644-

651

(55) Analysis of axisymmetric modified Helmholtz equation by using

boundary element method.

Yoneta_A, Tsuchimoto_M, Honma_T

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.1015-1018

(56) Simulation analysis of magnetic sensor for nondestructive

testing by boundary element method.

Enokizono_M, Nagata_S

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.877-880

(57) Electromagnetic transients induced in the tokamak first wall by

a plasma disruption using 'TRIFOU'.

Chaussecourte_P, Bossavit_A, Verite_JC, Crutzen_Y

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.861-864

(58) Evaluation of the electromagnetic consequences of a plasma

disruption on the magnetic fusion device in-vessel system.

Crutzen_YR, Rigo_S, Castillo_E

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.857-860

(59) Triangular mesh generation using knowledge base for three-

dimensional boundary element method.

Tsuboi_H, Shimotsukasa_T, Kato_K

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.799-802

(60) Adaptive mesh refinement for boundary element method and its

application to stripline analysis.

Park_DK, Ahn_CH, Lee_SY, Ra_JW

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.783-786

(61) Adaptively meshed boundary integral equation method for

nonlinear magnetostatics.

Lean_MH

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.614-617

(62) Robustness of the boundary integral equation method for

potential problems.

Watanabe_T, Kuno_Y, Uchikawa_Y

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.610-613

(63) Treatment of singularities in the computation of magnetic

fields with periodic boundary conditions by the boundary

element method.

Kost_A, Shen_JX

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.607-609

(64) Unified boundary integral equation and unified boundary element

equation.

Yuan_J, Xie_X, Shao_H

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.599-602

(65) Boundary element method with high order time element for

transient eddy current problems.

Zhan_Q, Chen_J

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.595-598

(66) Boundary element method combined with an electromagnetic source

simulation method for calculating 3D eddy current

distributions.

Ma_X, Wang_P

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.592-594

(67) Hybrid finite element and boundary element method applied to

electromagnetic problems.

Onuki_T

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.582-587

(68) Boundary element analysis of free boundary field-reversed

configurations.

Sawai_S, Tsuchimoto_M, Igarashi_H, Honma_T

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.571-574

(69) Analysis of ion beam trajectories by using boundary element

method.

Shirakawa_S, Igarashi_H, Honma_T

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.555-558

(70) BEM code for 3-D eddy current calculations.

Rucker_WM, Richter_KR

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.462-465

(71) Eddy current analysis by the boundary integral equation method.

Ishibashi_K

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.458-461

(72) Three-dimensional eddy current analysis by the boundary element

method using vector potential.

Tsuboi_H, Tanaka_M

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.454-457

(73) Three-dimensional magnetic field analysis method using scalar

potential formulated by boundary element method.

Koizumi_M, Onisawa_M, Utamura_M

IEEE Transactions on Magnetics, Mar 1990., Vol.26, No.2,

pp.360-363

(74) On geometrical dependencies of capacitive coupling voltage

contrast.

Batinic_M, Goerlich_S, Herrmann_KD

Microelectronic Engineering, 1990., Vol.12, No.1-4, pp.341-348

(75) New boundary element method for resonance of an acoustic

enclosure.

Hong_HK, Li_YF

Chung-kuo Kung Ch'eng Hsueh K'an/Journal of the Chinese

Institute of Engineers, May 1990, Vol.13, No.3, pp.313-326

(76) Study of stability of shallowly buried pipelines.

Chiou_YJ, Chi_SY, Wang_LJ

Chung-kuo Kung Ch'eng Hsueh K'an/Journal of the Chinese

Institute of Engineers, May 1990, Vol.13, No.3, pp.285-296

(77) Calculation of stability derivatives for slender bodies using

boundary element method.

Suzuki_S, Fukuda_K

Journal of Guidance, Control, and Dynamics, Jul-Aug 1990,

Vol.13, No.4, pp.763-765

(78) Optimization of cathodic protection by using boundary element

method.

Kishimoto_K, Amaya_K, Aoki_S

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1990, Vol.56,

No.525, pp.1282-1287

(79) Boundary integral formulations for sensitivity analysis of

potential problems.

Matsumoto_T, Tanaka_M

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1990, Vol.56,

No.525, pp.1262-1267

(80) Numerical method for three-dimensional steady thermal stress

problems using thermoelastic displacement potential.

Ochiai_Y, Ishida_R

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1990, Vol.56,

No.525, pp.1199-1203

(81) Numerical simulation of fracture behavior in granite using the

tension-softening model.

Sato_K, Hashida_T, Takahashi_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1990, Vol.56,

No.525, pp.1183-1188

(82) Ultrasonic monitoring of the fracture process zone in fracture

toughness test of granite.

Hashida_T, Ueda_T, Date_K, Takahashi_H, Abe_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1990, Vol.56,

No.525, pp.1177-1182

(83) Full modes analysis of rectangular optical waveguide using new

boundary element method.

Ma_JG

International Journal of Infrared and Millimeter Waves, Mar

1990, Vol.11, No.3, pp.425-433

(84) Time-domain boundary element analysis for linear, viscoelastic

problem subject to body force.

Sim_WJ, Kwak_BM

Communications in Applied Numerical Methods, May 1990, Vol.6,

No.4, pp.297-304

(85) Boundary element approach for transient and nonlinear thermal

diffusion.

Pasquetti_R, Caruso_A

Numerical Heat Transfer, Part B: Fundamentals, 1990, Vol.17,

No.1, pp.83-99

(86) Application of the boundary-element method to offshore cathodic

protection modeling.

Cicognani_P, Gasparoni_F, Mazza_B, Pastore_T

Journal of the Electrochemical Society, Jun 1990, Vol.137,

No.6, pp.1689-1695

(87) Boundary element algorithm using compatible boundary

displacements and tractions.

Piltner_R, Taylor_RL

International Journal for Numerical Methods in Engineering, May

1990, Vol.29, No.6, pp.1323-1341

(88) Error indicators for adaptive mesh refinement in the boundary

element method. A new approach.

Guiggiani_M

International Journal for Numerical Methods in Engineering, May

1990, Vol.29, No.6, pp.1247-1269

(89) Hypersingular integrals in boundary element fracture analysis.

Gray_LJ, Martha_LF, Ingraffea_AR

International Journal for Numerical Methods in Engineering, May

1990, Vol.29, No.6, pp.1135-1158

(90) Computations of eigenfunctions and eigenfrequencies of two

dimensional vibrating structures by the boundary element

method.

Zhou_J

Proceedings of the IEEE Conference on Decision and Control

Including The Symposium on Adaptive Processes, 1989, Vol.3,

pp.2045-2049

(91) Numerical simulation of resin transfer molding process using

boundary element method.

Um_MK, Lee_WI

National SAMPE Symposium and Exhibition (Proceedings), 1990,

Vol.35, No.Book 2, pp.1905-1916

(92) Liquid sloshing in axially symmetric containers under

microgravity.

Siekmann_J, Schilling_U

BN: 1989, No.295, pp.435-441

(93) Novel displacement gradient boundary element method for elastic

stress analysis with high accuracy.

Okada_H, Rajiyah_H, Atluri_SN

American Society of Mechanical Engineers (Paper), 1989,

No.1989., p.APM21 9

(94) New boundary equation solution to the plate problem.

Katsikadelis_JT, Armenakas_AE

American Society of Mechanical Engineers (Paper), 1989,

No.1989., p.APM9 11

(95) Validation of the hybrid quasi-static/full-wave method for

capacitively loaded thin-wire antennas.

Olsen_RG, Mannikko_PD

IEEE Transactions on Antennas and Propagation, Apr 1990,

Vol.38, No.4, pp.516-522

(96) Design sensitivity analysis of boundary-element substructures.

Saigal_S, Kane_JH

AIAA Journal, Jul 1990, Vol.28, No.7, pp.1277-1284

(97) Boundary-element shape optimization system for aircraft

structural components.

Saigal_S, Kane_JH

AIAA Journal, Jul 1990, Vol.28, No.7, pp.1203-1204

(98) Effective numerical method for calculation of leakage magnetic

flux.

Mayer_D, Ulrych_B

Acta Technica CSAV (Ceskoslovensk Akademie Ved), 1990, Vol.35,

No.2, pp.136-145

(99) Boundary element analysis of nonlinear water wave problem.

Kamiya_N, Miyazawa_H

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Apr 1990, Vol.56,

No.524, pp.1057-1061

(100) Three-dimensional analysis of sloshing problems using a

boundary element method.

Amano_K, Koizumi_M, Yamakawa_M

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Mar 1990, Vol.56,

No.523, pp.684-689

(101) Computer aided design system for three-dimensional compression

mold heating.

Forcucci_SJ, Kwon_TH

Journal of Engineering for Industry, Transactions ASME, Nov

1989, Vol.111, No.4, pp.361-368

(102) On the flow of a non-Newtonian liquid induced by intestine-like

contractions.

PhanThien_N, Low_HT

Journal of Biomechanical Engineering, Transactions of the ASME,

Feb 1989, Vol.111, No.1, pp.1-8

(103) 3-D soil-structure interaction analysis by BEM: comparison

studies and computational aspects.

Mohammadi_M, Karabalis_DL

Soil Dynamics and Earthquake Engineering, Mar 1990, Vol.9,

No.2, pp.96-108

(104) Causality of the boundary element method in elastodynamics.

Triantafyllidis_T, Dasgupta_B

Soil Dynamics and Earthquake Engineering, Mar 1990, Vol.9,

No.2, pp.78-84

(105) Analysis of scattered near field and induced current of a beam

wave by pits on optical disk using boundary element method.

Manabe_K, Miyazaki_Y, Tanaka_T

Electronics & Communications in Japan. Part II: Electronics,

Dec 1989, Vol.72, No.12, pp.1-9

(106) Advanced time-domain formulation of BEM for two-dimensional

transient elastodynamics.

Israil_ASM, Banerjee_PK

International Journal for Numerical Methods in Engineering, May

20 1990, Vol.29, No.7, pp.1421-1440

(107) Boundary element method for modelling MIC devices.

Wu_KL, Litva_J

Electronics Letters, Apr 14 1990, Vol.26, No.8, pp.518-520

(108) Improved algorithm for inverse design of thermal problems with

multiple materials.

Shau_R, Batista_J, Carey_GF

Journal of Heat Transfer, Transactions ASME, May 1990, Vol.112,

No.2, pp.274-279

(109) Study of the failure of numerical solutions in boundary element

analysis of acoustic radiation problems.

Dokumaci_E

Journal of Sound and Vibration, May 22 1990, Vol.139, No.1,

pp.83-97

(110) Response of piles and pile groups to travelling SH-waves.

Mamoon_SM, Banerjee_PK

Earthquake Engineering & Structural Dynamics, May 1990, Vol.19,

No.4, pp.597-610

(111) AE observation in the pull-out process of shallow hook anchors.

Ohtsu_M, Shigeishi_M, Iwase_H

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Aug 1989, No.408 pt 5-1, pp.177-186

(112) Analysis of electromagnetic field distribution in tunnels with

branches and bends.

Sakai_K, Koshiba_M

Electronics & Communications in Japan, Part 1: Communications

(English translation of Denshi Tsushin Gakkai Ronbunshi), Nov

1989, Vol.72, No.11, pp.76-86

(113) Die Nutzung elektrischer Krafte bie der Staubabscheidung.

Exploitation of electrical forces for dust separation.

Petroll_J, Schneider_B, Foedisch_H

Staub - Reinhaltung der Luft, Apr 1990, Vol.50, No.4, pp.145-

150

(114) Three-dimensional conductive effects during scribing with a CW

laser.

Roy_S, Modest_MF

Journal of Thermophysics and Heat Transfer, Apr 1990, Vol.4,

No.2, pp.199-203

(115) Accurate interior point computations in the boundary integral

equation method.

Sisson_JMC

Computer Methods in Applied Mechanics and Engineering, Apr

1990, Vol.79, No.3, pp.281-307

(116) Arbitrary condensing, noncondensing solution strategy for large

scale, multi-zone boundary element analysis.

Kane_JH, Kumar_BLK, Saigal_S

Computer Methods in Applied Mechanics and Engineering, Mar

1990, Vol.79, No.2, pp.219-244

(117) Boundary effects for a reinforced cracked sheet using the

boundary element method.

Dowrick_G, Cartwright_DJ, Rooke_DP

Theoretical and Applied Fracture Mechanics, Feb 1990, Vol.12,

No.3, pp.251-260

(118) Boundary element method for analysing snap-off of long gas

bubble in two-dimensional venturi capillary filled with viscous

liquid.

Lu_WQ, Gao_Z, Chen_Xm

Kexue Tongbao/Science Bulletin, Jul 1989, Vol.34, No.14,

pp.1163-1168

(119) Application of photoelastic and boundary element methods to

stress analysis.

Umeagukwu_C

International Journal of Mechanical Engineering Education, Jul

1989, Vol.17, No.3, pp.163-174

(120) Numerical calculation of hydrodynamic coefficient for a

floating body in waves.

Li_D, Shen_G

China Ocean Engineering, 1989, Vol.3, No.3, pp.307-319

(121) Importance and use of rigid body mode in boundary element

method.

Vable_M

International Journal for Numerical Methods in Engineering, Mar

1990, Vol.29, No.3, pp.453-472

(122) Finite element / boundary element. Modified modal decomposition

method for vibration and sound radiation from submerged shell

of revolution.

Zhang_J, He_Z

Chinese Journal of Acoustics, Oct-Dec 1989, Vol.8, No.4,

pp.315-324

(123) Construction of superelements for heat-conduction and potential

problems.

Malikov_YK, Lisienko_VG, Vostrotin_AE

Journal of Engineering Physics (English Translation of

Inzhenerno-Fizicheskii Zhurnal), Jun 1989, Vol.55, No.6,

pp.1444-1450

(124) Wave propagation in hyper-structures.

Ettouney_M, Benaroya_H, Wright_J

BN: Eng Constr Oper Space II Proc Space 90 Part II., 1990, pp.1094-

1103

(125) Optimum shape design of structures under uncertain loadings by

boundary element method.

Tada_Y, Matsumoto_R, Imamura_O

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Apr 1990, Vol.56,

No.524, pp.1005-1010

(126) Evaluation of the effect of a sharp notch on the fatigue and

static strength by the application of an equivalent stress-

intensity factor.

Kihara_S, Yoshii_A

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Apr 1990, Vol.56,

No.524, pp.903-910

(127) Stress intensity evaluation for surface cracks by means of

boundary element method and influence function method and the

surface crack extension analysis.

Yuuki_R, Ejima_K

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Apr 1990, Vol.56,

No.524, pp.791-797

(128) Boundary element calculation of shallow water waves.

Kaneko_N, Utagawa_N, Kawahara_M

International Journal for Numerical Methods in Fluids, May

1990, Vol.10, No.7, pp.811-825

(129) Dynamic simulation of the hydrodynamic interaction among

immersed particles in stokes flow.

Ingber_MS

International Journal for Numerical Methods in Fluids, May

1990, Vol.10, No.7, pp.791-809

(130) Application of boundary element method in the fracture analysis

on steam turbine rotor.

Yang_X, Chang_B

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese

Society of Electrical Engineering, Jan 1990, Vol.10, No.1,

pp.46-52

(131) Unified boundary integral equation and unified boundary element

equation.

Ynan_J, Xie_X, Shao_H

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese

Society of Electrical Engineering, Mar 1990, Vol.10, No.2,

pp.10-24

(132) Iterative solution of boundary element equations for the

exterior Helmholtz problem.

Amini_S, Ke_C, Harris_PJ

Journal of Vibration, Acoustics, Stress, and Reliability in

Design, Apr 1990, Vol.112, No.2, pp.257-262

(133) Numerical evaluation of the performance of active noise control

systems.

Mollo_CG, Bernhard_RJ

Journal of Vibration, Acoustics, Stress, and Reliability in

Design, Apr 1990, Vol.112, No.2, pp.230-236

(134) Steady thermal stress analysis in two-dimensional problems by

thermoelastic displacement potential and boundary. Element

method.

Ochiai_Y, Ishida_R, Sekiya_T

Journal of Thermal Stresses, 1990, Vol.13, No.2, pp.151-159

(135) Application of the boundary element method to non-linear

diffusion with reaction problems.

Ramachandran_PA

International Journal for Numerical Methods in Engineering, Apr

1990, Vol.29, No.5, pp.1021-1031

(136) Advanced development of time-domain BEM for two-dimensional

scalar wave propagation.

Israil_ASM, Banerjee_PK

International Journal for Numerical Methods in Engineering, Apr

1990, Vol.29, No.5, pp.1003-1020

(137) Free vibration of axisymmetric solids by BEM using particular

integrals.

Wang_HC, Banerjee_PK

International Journal for Numerical Methods in Engineering, Apr

1990, Vol.29, No.5, pp.985-1001

(138) Sloshing in two-dimensional container with inclined side walls.

Boundary-element approach.

Kamiya_N, Miyazawa_H

Communications in Applied Numerical Methods, Apr 1990, Vol.6,

No.3, pp.207-214

(139) Three-dimensional boundary element reservoir model for seismic

analysis of arch and gravity dams.

Jablonski_AM, Humar_JL

Earthquake Engineering & Structural Dynamics, Apr 1990, Vol.19,

No.3, pp.359-376

(140) Contact problems of kinked cracks modelled by a boundary

integral method.

Zang_WL, Gudmundson_P

International Journal for Numerical Methods in Engineering, Mar

1990, Vol.29, No.4, pp.847-860

(141) Dynamic response of compliant materials to an impulsive

pressure field.

Dsa_JM, Dalton_C

International Journal for Numerical Methods in Engineering, Mar

1990, Vol.29, No.4, pp.811-831

(142) Some observations on time domain and frequency domain boundary

elements.

VonEstorff_O, Pais_AL, Kausel_E

International Journal for Numerical Methods in Engineering, Mar

1990, Vol.29, No.4, pp.785-800

(143) Displacement pattern matching and boundary-element methods for

elastic-plastic stress analysis.

Sirkis_JS, Taylor_CE

Experimental Mechanics, Mar 1990, Vol.30, No.1, pp.26-33

(144) Robni elementi za casovno odvisni prostorski laminarni viskozni

tok.

Boundary elements for time dependent 3-D laminar viscous fluid

flow.

Zagar_I, Skerget_P

Strojniski Vestnik, Oct-Dec 1989, Vol.35, No.10-12, pp.160-163

(145) New method of designing streamlined dies for shape extrusion.

Zhiping_S, Zeen_M

Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical

University, Oct 1989, Vol.7, No.4, pp.373-382

(146) Inverse epicardial potential solutions with an isolated heart

preparation.

Soucy_B, Gulrajani_RM, Cardinal_R

Proceedings of the Annual Conference on Engineering in Medicine

and Biology, 1989, Vol.11, No.1, pp.193-194

(147) Wide ranging study on the motions of SWATH ships with and

without forward speeds.

Chun_HH, Djatmiko_EB, McGregor_RC

Proceedings of the International Offshore Mechanics and Arctic

Engineering Symposium, 1990, Vol.1, No.B, pp.575-585

(148) Numerical solution of some solitary-wave and submerged-obstacle

interaction problems.

Ertekin_RC, Chian_C

Proceedings of the International Offshore Mechanics and Arctic

Engineering Symposium, 1990, Vol.1, No.A, pp.255-262

(149) Buckling analysis of orthotropic plates by boundary element

method.

Shi_G, Bezine_G

Mechanics Research Communications, Jan-Feb 1990, Vol.17, No.1,

pp.1-8

(150) Analysis of stress intensity factors for three dimensional

mixed mode cracks by an influence function method.

Shiratori_M, Ubukata_K

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Feb 1990, Vol.56,

No.522, pp.265-271

(151) Application of the boundary element method to heat transfer in

cracked nuclear fuel pellets.

Zagar_I, Rek_Z, Alujevic_A, Skerget_L

Kerntechnik, Feb 1990, Vol.55, No.1, pp.39-42

(152) Wave interaction with rubble toe protection.

Sulisz_W, McDougal_WG, Sollitt_CK

Ocean Engineering (Pergamon), 1989, Vol.16, No.5-6, pp.463-473

(153) Computational method for simulating transient motions of an

incompressible inviscid fluid with a free surface.

Nakayama_T

International Journal for Numerical Methods in Fluids, Apr 17

1990, Vol.10, No.6, pp.683-695

(154) Screening of incident plane waves by a cylindrical foundation.

Tong_J, Kuribayashi_E

Soils and Foundations, Dec 1989, Vol.29, No.4, pp.23-34

(155) Boundary element method based solution procedure for non-linear

boundary value problems.

Ramachandran_PA

Computers & Mathematics with Applications, 1990, Vol.19, No.10,

pp.63-76

(156) Remarks on methods for the computation of boundary-element

integrals by co-ordinate transformation.

SanzSerna_J, Doblare_M, Alarcon_E

Communications in Applied Numerical Methods, Feb 1990, Vol.6,

No.2, pp.121-123

(157) BEM for general anisotropic 2D elasticity using particular

integrals.

Deb_A, Banerjee_PK

Communications in Applied Numerical Methods, Feb 1990, Vol.6,

No.2, pp.111-119

(158) Computer implementation of the BEM dual reciprocity method for

the solution of general field equations.

Partridge_PW, Brebbia_CA

Communications in Applied Numerical Methods, Feb 1990, Vol.6,

No.2, pp.83-92

(159) Boundary-element analysis of plane-wave diffraction from

metallic gratings with arbitrary complex permittivity.

Nakata_Y, Koshiba_M

Electronics & Communications in Japan. Part II: Electronics,

Aug 1989, Vol.72, No.8, pp.78-86

(160) Pile behaviour: theory and application.

Poulos_HG

Research Report - University of Sydney, School of Civil and

Mining Engineering, May 1989, No.596, p.128p

(161) Some recent applications of numerical methods to geotechnical

analysis.

Booker_JR, Carter_JP, Small_JC, Brown_PT, Poulos_HG

Research Report - University of Sydney, School of Civil and

Mining Engineering, May 1989, No.598, p.34p

(162) New approach to finite deformation problems of

elastoplasticity. Boundary element analysis method.

Chen_ZQ, Ji_X

Computer Methods in Applied Mechanics and Engineering, Jan

1990, Vol.78, No.1, pp.1-18

(163) Inelastic transient dynamic analysis of three-dimensional

problems by BEM.

Ahmad_S, Banerjee_PK

International Journal for Numerical Methods in Engineering, Feb

1990, Vol.29, No.2, pp.371-390

(164) Generalized boundary element approach to Burgers' equation.

Kakuda_K, Tosaka_N

International Journal for Numerical Methods in Engineering, Feb

1990, Vol.29, No.2, pp.245-261

(165) Application of a hybrid method in studying amplification of

seismic waves by three dimensional sedimentary deposits of

arbitrary shape.

Mossessian_TK, Dravinski_M

American Society of Mechanical Engineers, Petroleum Division

(Publication) PD, 1990, Vol.29, pp.141-143

(166) Application of BEM to external flow problems.

AlShemmeri_TT, Betts_PL

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1988, Vol.105, pp.129-135

(167) CANSS - a prototype program for exact symbolic solutions to

heat transfer problems.

Zang_PH

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1988, Vol.105, pp.65-73

(168) Symbolic Computation in Fluid Mechanics and Heat Transfer.

Bau_HH, Herbert_T, Yovanovich_MM

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1988, Vol.105, p.153p

(169) Effects of hardening and of cyclic loads acting upon

structures.

Broz_P

Acta Technica CSAV (Ceskoslovensk Akademie Ved), 1989, Vol.34,

No.5, pp.563-578

(170) Computation of stresses in nonhomogeneous bodies using bem.

Markechova_I, Sladek_J, Sladek_V

Acta Technica CSAV (Ceskoslovensk Akademie Ved), 1989, Vol.34,

No.4, pp.487-511

(171) Boundary element solution of nonlinear material problems.

Broz_P

Acta Technica CSAV (Ceskoslovensk Akademie Ved), 1989, Vol.34,

No.2, pp.127-135

(172) Reliability analysis of structure using a coupled Monte Carlo-

boundary element method.

Zeng_ZJ

Reliability Engineering & System Safety, 1990, Vol.27, No.3,

pp.269-274

(173) Analysis of transonic integral equations. Part II. Boundary

element methods.

Ogana_W

AIAA Journal, Mar 1990, Vol.28, No.3, pp.557-558

(174) Analysis of coupled shearing and torsional deformation of beams

by boundary element method.

Katori_H, Nishimura_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Dec 1989, Vol.55,

No.520, pp.2465-2468

(175) Boundary integral formulation for heat conduction in composite

structures SI chip on ceramic substrate.

Kielczynski_P, Glowacki_A, Skulimowski_M

Electron Technology (Warsaw), 1989, Vol.21, No.1-2, pp.59-64

(176) CVBEM for multiply connected domains using a linear trial

function.

Harrymanm_RR_III, Hromadka_TVI, Vaughn_JL, Watson_DP

Applied Mathematical Modelling, Feb 1990, Vol.14, No.2, pp.104-

110

(177) Dielectric post resonances in a rectangular waveguide.

Ise_K, Koshiba_M

IEE Proceedings, Part H: Microwaves, Antennas and Propagation,

Feb 1990, Vol.137, No.1, pp.61-66

(178) EM scattering of an arbitrary multiple dielectric coated

conducting cylinder by coupled finite boundary element method.

Wu_KL, Delisle_GY, Fang_DG

IEE Proceedings, Part H: Microwaves, Antennas and Propagation,

Feb 1990, Vol.137, No.1, pp.1-4

(179) Boundary element approach for transient and nonlinear thermal

diffusion.

Pasquetti_R, Caruso_A

Numerical Heat Transfer, 1990, Vol.17, No.1, pp.83-99

(180) Reanalysis for structural modifications in boundary-element

response and design sensitivity analysis.

Saigal_S

AIAA Journal, Feb 1990, Vol.28, No.2, pp.323-328

(181) Integration procedure for curved boundary elements.

AbdelAkher_A, Hartley_GA

Communications in Applied Numerical Methods, Jan 1990, Vol.6,

No.1, pp.49-56

(182) Evaluation of domain integrals in the boundary element method.

Pina_HL

Communications in Applied Numerical Methods, Jan 1990, Vol.6,

No.1, pp.57-60

(183) Unified formulation of two existing time-domain boundary-

element approaches.

Gallego_R, Dominguez_J

Communications in Applied Numerical Methods, Jan 1990, Vol.6,

No.1, pp.17-25

(184) Motion analysis of a spinning satellite system with off -

centre tanks partially filled with liquid.

Wang_Z, Liao_M, Deng_Z

Acta Mechanica Sinica/Lixue Xuebao, Aug 1989, Vol.5, No.3,

pp.269-277

(185) Molecular models and flow calculations. II. Simulation of

steady planar flow.

Fan_X

Acta Mechanica Sinica/Lixue Xuebao, Aug 1989, Vol.5, No.3,

pp.216-226

(186) Three-dimensional nonlinear boundary element solution for

potential flow in hydraulic machinery.

Yan_C, Wu_Y, Mei_Z

Shuili Xuebao/Journal of Hydraulic Engineering, 1989, No.8,

pp.12-20

(187) Application of the complex variable boundary element method to

solving potential problems in doubly connected domains.

Kassab_AJ, Hsieh_CK

International Journal for Numerical Methods in Engineering, Jan

1990, Vol.29, No.1, pp.161-179

(188) Full tangent stiffness field-boundary-element formulation for

geometric and material non-linear problems of solid mechanics.

Okada_H, Rajiyah_H, Atluri_SN

International Journal for Numerical Methods in Engineering, Jan

1990, Vol.29, No.1, pp.15-35

(189) Proposed approach for analyzing interference effects of

multiple arbitrary holes and cracks subjected to complex

loading.

Yang_Z, Wang_Y

Huadong Huagong Xueyuan Xuebao/Journal of East China Institute

of Chemical Technology, 1989, Vol.15, No.4, pp.549-557

(190) Application of the boundary element method to radionuclide

diffusion in metal grain textures.

Rek_Z, Zagar_I, Alujevic_A, Skerget_P

Kerntechnik, Oct 1989, Vol.54, No.3, pp.195-197

(191) Existence theorems in the theory of bending of micropolar

plates.

Schiavone_P, Constanda_C

International Journal of Engineering Science, 1989, Vol.27,

No.4, pp.463-468

(192) Particle collection efficiency of a cascade of cylinders.

Ingham_DB, Hildyard_ML, Heggs_PJ

Canadian Journal of Chemical Engineering, Aug 1989, Vol.67,

No.4, pp.545-553

(193) Application of coupled FEM-BEM analysis for three dimensional

seepage with drainage holes.

Zhang_Y, Chen_P, Wang_L

Shuili Xuebao/Journal of Hydraulic Engineering, 1989, No.5,

pp.30-38

(194) New method for robust fast tracking channel equalization.

Doherty_JF, Mammone_RJ

Proceedings - IEEE Military Communications Conference, 1989,

Vol.1, pp.284-288

(195) Thermal analysis of integrated circuit devices and packages.

Lee_CC, Palisoc_AL, Min_YJ

IEEE Transactions on Components, Hybrids and Manufacturing

Technology, Dec 1989., Vol.12, No.4, pp.701-709

(196) Boundary condition expansion of basis functions method

implemented by fast Fourier transform algorithms.

Stankovic_L, Jovicevic_S

IEEE Transactions on Microwave Theory and Techniques, Mar 1990,

Vol.38, No.3, pp.296-301

(197) ULSI 2-D capacitance simulator for complex structures based on

actual processes.

Fukuda_S, Shigyo_N, Kato_K, Nakamura_S

IEEE Transactions on Computer-Aided Design of Integrated

Circuits and Systems, Jan 1990, Vol.9, No.1, pp.39-47

(198) Analysis of the dynamic stress concentration factor by the two-

dimensional boundary element method.

Matsumoto_H, Adachi_T, Kakuhama_Y, Fukuzawa_K

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Jan 1990, Vol.33, No.1, pp.37-43

(199) Zur Parametererregung des Rad-Schiene-Systems. Berechnung der

Fahrzeug-Fahrweg-Untergrund-Dynamik und experimentelle

Verifikation am Hochgeschwindigkeitszug Intercity Experimental.

Parametric excitation of rail-wheel-system: calculation of

vehicle-track-subsoil-dynamics and experimental results of the

high speed train Intercity Experimental.

Auersch_L

Ingenieur-Archiv, 1990, Vol.60, No.3, pp.141-156

(200) Estimation of hydrodynamic force acting on tube bundles in a

circular tank by sloshing.

Shintaku_S, Hiramatsu_T, Komura_Y, Shintani_M, Okuya_A

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jan 1990, Vol.56,

No.521, pp.8-15

(201) Fundamental solution for two-phase transversely isotropic

materials.

Koguchi_H, Ohshima_M, Yada_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jan 1990, Vol.56,

No.521, pp.84-92

(202) Identification of a three-dimensional internal crack by the

electric potential CT method.

Sakagami_T, Kubo_S, Ohji_K, Yamamoto_K, Nakatsuka_K

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jan 1990, Vol.56,

No.521, pp.27-32

(203) Boundary element program package for electromagnetic excitation

of conducting bodies of revolution by an asymmetrical slot.

Davidson_DB, McNamara_DA

Computer Physics Communications, Dec 1 1989, Vol.56, No.2,

pp.249-257

(204) Solution of the electromagnetic field by the generalized method

of boundary elements.

Mayer_D, Ulrych_B

Acta Technica CSAV (Ceskoslovensk Akademie Ved), 1989, Vol.34,

No.6, pp.734-744

(205) Boundary-element investigation of the pressure-hole effect.

Sugeng_F, PhanThien_N, Tanner_RI

Journal of Rheology, Apr 1988, Vol.32, No.3, pp.215-233

(206) Effects of geometrical and material properties on the vertical

vibration of three-dimensional foundations by bem.

Israil_ASM, Banerjee_PK

International Journal for Numerical and Analytical Methods in

Geomechanics, Jan-Feb 1990, Vol.14, No.1, pp.49-70

(207) Robna integralska metoda za casovno odvisne difuzijsko-

konvekcijske probleme.

Boundary integral method for time dependent diffusion-

convection problems.

Rek_Z, Skerget_L

Strojniski Vestnik, Jan-Mar 1989, Vol.35, No.1-3, pp.9-12

(208) Note on the efficiency of the boundary method for inelastic

axisymmetric problems with large strains.

Rajiyah_H, Mukherjee_S

Journal of Applied Mechanics, Transactions ASME, Sep 1989,

Vol.56, No.3, pp.721-724

(209) Boundary integral equation formulation in derivative unknowns

for two-dimensional potential problems.

Choi_JH, Kwak_BM

Journal of Applied Mechanics, Transactions ASME, Sep 1989,

Vol.56, No.3, pp.617-623

(210) Stress intensity factor analysis for surface cracks of a

cylindrical storage tank under seismic loading.

Yoshida_S, Miyoshi_T

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.167, pp.129-134

(211) Analysis of stress intensity factors for surface cracks in

pre/post penetration.

Miyoshi_T, Ishii_K

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.167, pp.51-56

(212) Concepts and solutions of damping description in materials and

members.

Gaul_L

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1989, Vol.18-2, pp.205-213

(213) Boundary element method for the heat transfer in metal cutting.

Chan_CL, Chandra_A

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1989, Vol.113, pp.19-29

(214) External conditions for the vector potential in the boundary

element method.

Tsuboi_H, Tanaka_M

IEEE Transactions on Magnetics, Sep 1989., Vol.25, No.5,

pp.4138-4140

(215) Constrained indirect BEM for eddy current calculations in

multiple conductor TM induction problems.

Ahmed_MT, Lavers_JD, Burke_PE

IEEE Transactions on Magnetics, Sep 1989., Vol.25, No.5,

pp.3946-3948

(216) Direct BIE formulation for skin and proximity effect

calculation with and without the use of the surface impedance

approximation.

Ahmed_MT, Lavers_JD, Burke_PE

IEEE Transactions on Magnetics, Sep 1989., Vol.25, No.5,

pp.3937-3939

(217) Electromagnetic field analysis of the wire antenna in the

presence of a dielectric with three-dimensional shape.

Tsuboi_H, Tanaka_H, Fujita_M

IEEE Transactions on Magnetics, Sep 1989., Vol.25, No.5,

pp.3602-3604

(218) Boundary element analysis of electromagnetic confinement

applications.

Ahmed_MR, Lavers_JD, Burke_PE

IEEE Transactions on Magnetics, Sep 1989., Vol.25, No.5,

pp.3599-3601

(219) 3-D magnetostatic field calculation for a magnetic circuit with

no (a narrow) air gap.

Morisue_T

IEEE Transactions on Magnetics, Sep 1989., Vol.25, No.5,

pp.3266-3268

(220) Equivalent circuits for dielectric posts in a rectangular

waveguide.

Ise_K, Koshiba_M

IEEE Transactions on Microwave Theory and Techniques, Nov 1989,

Vol.37, No.11, pp.1823-1825

(221) Fracture mechanics characterization of a 1:5 scale PWR vessel

model.

Cella_A, Macchi_A, Sampietri_C

International Journal of Pressure Vessels and Piping, 1989,

Vol.40, No.4, pp.259-278

(222) Pore pressure loads on gravity structures.

Garrison_CJ

Applied Ocean Research, Oct 1989, Vol.11, No.4, pp.194-201

(223) On BEM formulation of transient axisymmetric heat conduction

problems.

Ishida_R, Ochiai_Y

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Nov 1989, Vol.55,

No.519, pp.3493-3498

(224) Direct approach for two-dimensional elastodynamic problems by

boundary element method.

Yamazaki_K, Mori_M

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Nov 1989, Vol.55,

No.519, pp.2259-2264

(225) Modelling of some elliptic fluid mechanics problems by the

boundary element method.

Grilli_S

Advances in Water Resources, Jun 1989, Vol.12, No.2, pp.66-73

(226) Direct and boundary-only solutions of multilayer aquifer

systems. Part B. Unsteady-state solution.

Zakikhani_M, Aral_MM

Journal of Hydrology, Nov 1989, Vol.111, No.1-4, pp.69-87

(227) Direct and boundary-only solutions of multilayer aquifer

systems. Part A. Steady-state solution.

Zakikhani_M, Aral_MM

Journal of Hydrology, Nov 1989, Vol.111, No.1-4, pp.49-67

(228) Propagation of transient SH-waves in a dipping structure by

finite- and boundary element methods.

Ivanov_T, Dineva_P, Angelov_T, Hadjikov_L

Acta Mechanica, Nov 1989, Vol.80, No.1-2, pp.113-125

(229) Hybrid finite element/boundary element method for analysis of

discontinuities in planar dielectric waveguides.

Dillon_BM, Ferrari_RL, Young_TP

Electronics Letters, Jan 4 1990, Vol.26, No.1, pp.47-48

(230) Fundamental solutions of the streamfunction-vorticity

formulation of the Navier-Stokes equations.

RodriguezPrada_HA, Pironti_FF, Saez_AE

International Journal for Numerical Methods in Fluids, Jan

1990, Vol.10, No.1, pp.1-12

(231) Noise source identification by an optimization technique using

the boundary element method.

Tanaka_M, Yazaki_S, Yamada_Y

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Oct 1989, Vol.55,

No.518, pp.2073-2079

(232) Energy absorption of two-dimensional floating bodies.

Kida_T, Takemoto_T

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Oct 1989, Vol.55,

No.518, pp.3049-3055

(233) Modelling method with computational mechanics for design work.

Nakajima_N, Tokumasu_S

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Oct 1989, Vol.55,

No.518, pp.2649-2656

(234) Conforming boundary elements in plane elasticity for shape

design sensitivity.

Saigal_S, Aithal_R, Kane_JH

International Journal for Numerical Methods in Engineering, Dec

1989, Vol.28, No.12, pp.2795-2811

(235) Boundary element design sensitivity analysis of symmetric

bodies.

Saigal_S, Aithal_R, Dyka_CT

AIAA Journal, Jan 1990, Vol.28, No.1, pp.180-183

(236) Dynamic response analysis of ground using a coupled finite

element and boundary element method in time domain.

Touhei_T, Yoshida_N

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Oct 1989, No.410 pt1-12, pp.395-404

(237) Optimization of electrodeposit uniformity by the use of

auxiliary electrodes.

Mehdizadeh_S, Dukovic_J, Andricacos_PC, Romankiw_LT, Cheh_HY

Journal of the Electrochemical Society, Jan 1990, Vol.137,

No.1, pp.110-117

(238) Indirect boundary integral equation applied to nonshallow

spherical shell problems with arbitrary boundary constraints.

Simos_N, Sadegh_AM

Journal of Applied Mechanics, Transactions ASME, Dec 1989,

Vol.56, No.4, pp.918-925

(239) Crack fronts trapped by arrays of obstacles. Numerical

solutions based on surface integral representation.

Fares_N

Journal of Applied Mechanics, Transactions ASME, Dec 1989,

Vol.56, No.4, pp.837-843

(240) Solving nonlinear steady-state potential problems in

inhomogenous bodies using the boundary-element method.

Bialecki_R, Nahlik_R

Numerical Heat Transfer, Part B: Fundamentals, 1989, Vol.16,

No.1, pp.79-96

(241) Hydroelastic efefcts on three dimensional structural dynamics.

Lee_CK, Lou_JYK

Ocean Engineering (Pergamon), 1989, Vol.16, No.4, pp.327-342

(242) Quadrature-collocation technique for boundary element method.

Application to helicopter fuselage.

Ryan_J, Le_TH

Vertica, 1989, Vol.13, No.4, pp.413-419

(243) Spatially regularized solution of inverse elasticity problems

using the BEM.

Zabaras_N, Morellas_V, Schnur_D

Communications in Applied Numerical Methods, Nov 1989, Vol.5,

No.8, pp.547-553

(244) New boundary integral equation-finite-element method for

clamped orthotropic plate bending problems.

Shi_G, Bezine_G

Communications in Applied Numerical Methods, Nov 1989, Vol.5,

No.8, pp.527-537

(245) Exact integrals for three-dimensional boundary element

potential problems.

Medina_DE, Liggett_JA

Communications in Applied Numerical Methods, Nov 1989, Vol.5,

No.8, pp.555-561

(246) Effects of interconnection lines in very high speed packaging

for digital applications.

Chilo_J, Angenieux_G

International Journal for Hybrid Microelectronics, Sep 1989,

Vol.12, No.3, pp.117-125

(247) Advanced inelastic analysis of solids by the boundary element

method.

Banerjee_PK, Henry_DP_Jr, Raveendra_ST

International Journal of Mechanical Sciences, 1989, Vol.31,

No.4, pp.309-322

(248) Interactive computer-graphics-based processor for boundary

element modelling of electromagnetic scattering by thin

conducting wires.

JansevanRensburg_DJ, McNamara_DA

Computer Physics Communications, Oct 1989, Vol.55, No.3,

pp.457-461

(249) Effect of an adjacent cavity on the interaction of elastic

waves with a crack.

Zhang_C, Achenbach_JD

International Journal of Engineering Science, 1989, Vol.27,

No.6, pp.711-722

(250) Boundary integral equation method for axisymmetric viscous

flows.

Graziani_G

International Journal of Engineering Science, 1989, Vol.27,

No.7, pp.855-864

(1) Modelling of infinitesimal amplitude water waves using an

improved boundary element method.

AlShemmeri_TT, Hamed_OMS

International Journal of Engineering Science, 1989, Vol.27,

No.10, pp.1217-1222

(2) Free and forced vibrations of plates by boundary elements.

Providakis_CP, Beskos_DE

Computer Methods in Applied Mechanics and Engineering, Sep

1989, Vol.74, No.3, pp.231-250

(3) Chemische, physikalische und mechanische

Bindungscharakteristiken bie stromlos beschichteten Substanzen.

Chemical, physical and mechanical adhesion characteristics of

electrolessly coated substances.

Schammler_G, Springer_J

Galvanotechnik, May 1989, Vol.80, No.5, pp.1549-1554

(4) Hybrid finite element-boundary element method and its

application to inverse scattering.

Lee_TK, Lee_SY, Ra_JW

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1989, Vol.3, pp.1628-1631

(5) Overall azimuthal pattern computation of blocked cylindrical

reflector antennas.

Miyata_K, Fukai_I

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1989, Vol.3, pp.1195-1198

(6) Planar waveguide model of Rotman lens.

Chan_KK

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1989, Vol.2, pp.651-654

(7) Radiation pattern analysis of corner reflector antennas by

boundary-element method.

Miyata_K, Fukai_I

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1989, Vol.1, pp.371-374

(8) Effect of butt weld reinforcement height of pressure vessels on

fatigue behavior.

Ding_HZ, Wang_NH, Ju_DY, Pan_ZH

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989., Vol.166, pp.109-113

(9) Computation of sound radiated from structures based on boundary

element method with an indirect method for processing the

singular numerical integrals.

Fu_Z, Li_X

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1989, Vol.18-3, pp.301-304

(10) Sound source reconstruction and sound field prediction using

the boundary integral equation method.

Kim_GT, Lee_BH

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1989, Vol.18-3, pp.295-300

(11) Dynamic response of orthotropic plate using BEM with

approximate fundamental solution.

Zhu_J, Ping_G

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1989, Vol.18-3, pp.161-164

(12) Prediction of axial behaviour of piles.

Poulos_HG

Geotechnical Special Publication, 1989, No.23, pp.83-95

(13) Predicting thermal boundary conditions inside cylinders of air-

cooled diesel engines by boundary element method.

Shang_P, Wang_C, Zhang_S, Tu_C

Proceedings of the International Centre for Heat and Mass

Transfer, 1989, pp.363-371

(14) On the numerical accuracy of the boundary element method.

Meijs_JWH, Weier_OW, Peters_MJ, VanOosterom_A

IEEE Transactions on Biomedical Engineering, Oct 1989, Vol.36,

No.10, pp.1038-1049

(15) Die Fundamentbemessung bei satt einbetonierten

Turbinenspiralen.

Calculation of foundations for fully in concrete embedded

spiral casings of turbines.

Wisser_EKR

Bauingenieur, Mar 1989, Vol.64, No.3, pp.97-101

(16) Application of boundary element method to reservoir engineering

problems.

Kikani_J, Horne_R

Journal of Petroleum Science & Engineering, Nov 1989, Vol.3,

No.3, pp.229-241

(17) Shape optimization of elastic homogeneous 2D bodies by the

boundary element method.

Espiga_F, Gracia_L, Doblare_M

Computers and Structures, 1989, Vol.33, No.5, pp.1233-1241

(18) Numerical method for shape optimization using bem.

Kobelev_VV

Computers and Structures, 1989, Vol.33, No.5, pp.1223-1227

(19) On the problem of free torsional vibration of variable diameter

circular shafts by the boundary integral equation method.

Huang_MK, Wu_J

Computers and Structures, 1989, Vol.33, No.5, pp.1133-1137

(20) Boundary element approach to the dynamic stiffness functions of

circular foundations.

Alarcon_E, Cano_JJ, Dominguez_J

International Journal for Numerical and Analytical Methods in

Geomechanics, Nov-Dec 1989, Vol.13, No.6, pp.645-664

(21) Dynamic analysis of cracks using boundary element method.

Chirino_F, Dominguez_J

Engineering Fracture Mechanics, 1989, Vol.34, No.5-6, pp.1051-

1061

(22) Elasto-plastic deformation of upsetting by boundary element

method.

Hung_CC, Weng_CI

Zhongguo Gongchen Xuekan/Journal of the Chinese Institute of

Engineers, Transactions of the Chinese Institute of

Engineers,Series A, Sep 1989, Vol.12, No.5, pp.623-631

(23) On the slider-bearing flow of a viscoelastic fluid.

PhanThien_N, Zheng_R

Journal of Non-Newtonian Fluid Mechanics, Oct 1989, Vol.33,

No.2, pp.197-218

(24) Dynamic response analysis of rigid foundations and of elastic

structures by boundary element procedures.

Antes_H, vonEstorff_O

Soil Dynamics and Earthquake Engineering, Apr 1989, Vol.8,

No.2, pp.68-74

(25) Elasto-plastic analysis of a single rectangular opening and

parallel circular openings under bi-axial stress condition.

Elasto-plastic analysis of rock caverns by a coupled boundary

element-characteristics method (3rd report).

Aoki_T, Sugawara_K

Journal of the Mining and Material Processing Institute of

Japan, Jun 1989, Vol.105, No.7, pp.511-516

(26) Analysis of an elastic contact problem by the boundary element

method. (An approach by the penalty function method).

Yamazaki_K, Mori_M

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Oct 1989, Vol.32, No.4, pp.508-513

(27) Stress concentration of a finite solid cylinder with the form

of a specimen under torsion.

Hasegawa_H, Iwata_K, Kondou_K

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Oct 1989, Vol.32, No.4, pp.492-497

(28) Analysis of stress intensity factor using the energy method

combined with the boundary element method.

Miyazaki_N, Ikeda_T, Munakata_T

Computers and Structures, 1989, Vol.33, No.3, pp.867-871

(29) Boundary element implicit differentiation equations for design

sensitivities of axisymmetric structures.

Saigal_S, Borggaard_JT, Kane_JH

International Journal of Solids and Structures, 1989, Vol.25,

No.5, pp.527-538

(30) Development of a boundary element method for time-dependent

planar thermoelasticity.

Dargush_GF, Banerjee_PK

International Journal of Solids and Structures, 1989, Vol.25,

No.9, pp.999-1021

(31) Formulation of boundary integral equations for linear elastic

shells.

Shih_KG, Palazotto_AN

Computers & Mathematics with Applications, 1989, Vol.18, No.12,

pp.985-999

(32) FREEDOM; a trnsient fission-product release model for

radioactive and stable species.

Macdonald_LD, Duncan_DB, Lewis_BJ, Iglesias_FC

Atomic Energy of Canada Limited, AECL (Report), May 1989,

No.9810, p.15p

(33) Constrained variational method for two-dimensional shape

optimization.

West_RL_Jr, Sandgren_E

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1989, Vol.2, pp.201-207

(34) On the design of optimum flow headers for heat exchangers.

Cabuk_H, Modi_V

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1989, Vol.108, pp.161-167

(35) Boundary element application of induction heating devices with

rotational symmetry.

Ahmed_MR, Lavers_JD, Burke_PE

IEEE Transactions on Magnetics, Jul 1989., Vol.25, No.4,

pp.3022-3024

(36) Boundary integral equation formulation of skin effect problems

in multiconductor transmission lines.

Wu_RB, Yang_JC

IEEE Transactions on Magnetics, Jul 1989., Vol.25, No.4,

pp.3013-3015

(37) Electromagnetic field analysis in remote field eddy current

testing systems.

Burais_N, Nicolas_A

IEEE Transactions on Magnetics, Jul 1989., Vol.25, No.4,

pp.3010-3012

(38) Evaluation of the direct boundary element method and the method

of fundamental solutions.

Ahmed_MT, Lavers_JD, Burke_PE

IEEE Transactions on Magnetics, Jul 1989., Vol.25, No.4,

pp.3001-3006

(39) Some technical aspects of implementing boundary element

equations.

Peaiyoung_S, Salon_SJ, Mayergoyz_I

IEEE Transactions on Magnetics, Jul 1989., Vol.25, No.4,

pp.2998-3000

(40) Parasitic capacitance effects of planar resistors.

Demurie_SN, DeMey_G

IEEE Transactions on Components, Hybrids and Manufacturing

Technology, Sep 1989, Vol.12, No.3, pp.348-351

(41) Ground control in the Rogers Pass Tunnel at the trans-Canada

highway crossing.

Heinz_H, Eisenstein_Z, Thomson_S

Tunnelling and Underground Space Technology, 1989, Vol.4, No.2,

pp.185-191

(42) Study on lateral dashpots for soil-structure interaction and

its application to a simplified technique.

Fukuwa_N, Nakai_S

Soils and Foundations, Sep 1989, Vol.29, No.3, pp.25-40

(43) Formulation for the numerical analysis of a transient

axisymmetric thermal stress problem.

Ochiai_Y, Ishida_R

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Sep 1989, Vol.55,

No.517, pp.2009-2013

(44) Fretting fatigue improvement by making a groove or knurling on

a contact surface.

Nakamura_M, Hattori_T, Sakata_H, Watanabe_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Sep 1989, Vol.55,

No.517, pp.1949-1954

(45) On the implementation of the Galerkin approach in the boundary

element method.

Parreira_P, Guiggiani_M

Computers and Structures, 1989, Vol.33, No.1, pp.269-279

(46) Shape design sensitivity analysis of an axisymmetric turbine

disk using the boundary element method.

Park_CW, Yoo_YM, Kwon_KH

Computers and Structures, 1989, Vol.33, No.1, pp.7-16

(47) Coupled formulation of finite and boundary element methods in

two-dimensional elasticity.

Chang_KC, Jeong_SA

Computers and Structures, 1989, Vol.32, No.6, pp.1429-1437

(48) Variationally coupled finite element-boundary element method.

Belytschko_T, Chang_HS, Lu_YY

Computers and Structures, 1989, Vol.33, No.1, pp.17-20

(49) Application of the finite Fourier series to the boundary

element method.

Kusama_T, Ohkami_T, Mitsui_Y

Computers and Structures, 1989, Vol.32, No.6, pp.1267-1273

(50) Solving the two-dimensional Laplace problem on a polygonal

domain with mixed Dirichlet-Von Neumann boundary conditions and

using a self-refining boundary element mesh.

Schreiber_O

Computers and Structures, 1989, Vol.32, No.6, pp.1255-1266

(51) Alternative analysis model for composite wall-beam systems.

Papia_M

Computers and Structures, 1989, Vol.32, No.1, pp.149-155

(52) Stress singularity, notch stress and structural stress at spot-

welded joints.

Radaj_D

Engineering Fracture Mechanics, 1989, Vol.34, No.2, pp.495-506

(53) Improved boundary force method for analysing cracked

anisotropic materials.

Tan_PW, Bigelow_CA

Engineering Fracture Mechanics, 1989, Vol.34, No.2, pp.347-357

(54) Investigation of a column with a slant elliptic crack under

compression in boundary element method.

Zhang_Y, Luo_G, Wang_Y

Engineering Fracture Mechanics, 1989, Vol.33, No.4, pp.581-587

(55) Evaluation of K-factors and weight functions for 2-D mixed-mode

multiple cracks by the boundary element alternating method.

Rajiyah_H, Atluri_SN

Engineering Fracture Mechanics, 1989, Vol.32, No.6, pp.911-922

(56) Time-domain boundary element analysis of dynamic near-tip

fields for impact-loaded collinear cracks.

Zhang_C, Achenbach_JD

Engineering Fracture Mechanics, 1989, Vol.32, No.6, pp.899-909

(57) Integral equation method for piece-wise smooth cracks in an

elastic half-plane.

Zang_W, Gudmundson_P

Engineering Fracture Mechanics, 1989, Vol.32, No.6, pp.889-897

(58) On existence theorems in the theory of extensional motions of

thin micropolar plates.

Schiavone_P

International Journal of Engineering Science, 1989, Vol.27,

No.9, pp.1129-1133

(59) Treatment of corners in BIE analysis of potential problems.

Walker_SP, Fenner_RT

International Journal for Numerical Methods in Engineering, Nov

1989, Vol.28, No.11, pp.2569-2581

(60) Analysis of the light-beam scattering and the sum and

differential signal output by arbitrarily shaped pits and

bosses.

Funabiki_Y, Kojima_T

Electronics & Communications in Japan. Part II: Electronics,

May 1989, Vol.72, No.5, pp.37-47

(61) Semianalytical structural sensitivity formulation in boundary

elements.

Saigal_S, Aithal_R, Kane_JH

AIAA Journal, Nov 1989, Vol.27, No.11, pp.1615-1621

(62) Generalized method of predicting optimal performance of active

noise controllers.

Molo_CG, Bernhard_RJ

AIAA Journal, Nov 1989, Vol.27, No.11, pp.1473-1478

(63) Boundary integral equation method for consolidation problems.

Nishimura_N, Kobayashi_S

International Journal of Solids and Structures, 1989, Vol.25,

No.1, pp.1-21

(64) Das BETA(Boundary Element-Methods in Thermoelastic Analysis)

Programmsystem und seine Anwendung zur Querschnittsanalyse.

BETA (Boundary Element-Methods in Thermoelastic Analysis)

system and its application for cross section analysis..

Athanasiadis_G, Kouvrakis_P

Forschung im Ingenieurwesen, Jul 1989, Vol.55, No.4, pp.128-132

(65) On the hydrodynamic braking flow of a viscoelastic fluid.

PhanThien_N, Jin_H, Tanner_RI

Wear, Oct 1989, Vol.133, No.2, pp.323-342

(66) Fracture-mechanics weight-functions by the removal of singular

fields using boundary element analysis.

Aliabadi_MH, Cartwright_DJ, Rooke_DP

International Journal of Fracture, Aug 1989, Vol.40, No.4,

pp.271-284

(67) On a BEM formulation for an axisymmetric heat-conduction

problem in a transversely isotropic medium.

Ishida_R, Ochiai_Y

Communications in Applied Numerical Methods, Oct 1989, Vol.5,

No.7, pp.483-488

(68) Fundamental solutions for anisotropic media with initial

stress.

Moroz_NG, Romanov_SV, Vorobei_VV

Soviet Applied Mechanics (English Translation of Prikladnaya

Mekhanika), Dec 1988, Vol.24, No.6, pp.570-576

(69) Analysis of groove NRD waveguide using eigen-weighted boundary

integral equation method.

Zhang_W, Zhu_L

BN: Int Conf Millimeter Wave Far-Infrared Technol., 1989, pp.518-

521

(70) Accurate design of MM-wave fin-line filter.

Feng_Zh, Li_Qy, Lei_J

BN: Int Conf Millimeter Wave Far-Infrared Technol., 1989, pp.338-

341

(71) New hybrid mode boundary integral method for analysis of MMIC

waveguides with complicated crossection.

Schroeder_W, Wolff_I

IEEE MTT-S International Microwave Symposium Digest, 1989,

Vol.II, pp.711-714

(72) Study on properties of some novel power capacitors.

Gong_J, Qiu_C

BN: Proc Second Int Conf Prop Appl Dielectr Mater, 1988, Vol.2,

pp.649-651

(73) Fluid-structure interaction analysis program for axisymmetric

structures.

Kondo_H, Yamamoto_S, Sasaki_Y

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.157, pp.179-185

(74) Meniscus and sloshing of a liquid in an axisymmetric container

at low-gravity.

Utsumi_M

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.157, pp.103-113

(75) Suppression of sloshing in a liquid tank by means of a reversed

U-tube.

Hayama_S, Inoue_Y, Watanabe_T

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.157, pp.95-102

(76) Three-dimensional analysis method for potential flow with a

moving liquid surface using a boundary element method.

Amano_K, Koizumi_M, Yamakawa_M

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.157, pp.127-132

(77) Three-dimensional inelastic boundary element analysis with

discontinuous discretization using continuous boundary elements

and internal cells.

Iwasaki_R

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.177, pp.207-212

(78) Inverse inspection by acoustic emission based on the boundary

element formulation.

Ohtsu_M

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.177, pp.201-205

(79) Transient elastodynamic boundary element analysis based on

step-by-step time integration scheme.

Tanaka_M, Matsumoto_T

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.177, pp.195-200

(80) Elastodynamic boundary element method applied to defect shape

identification.

Tanaka_M, Nakamura_M

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.177, pp.187-194

(81) Optimizing design and performance of an MWD resistivity sensor.

Turvill_JA, Hebel_JB

Society of Petroleum Engineers of AIME, (Paper) SPE, 1989,

Vol.5, pp.505-520 19621

(82) Modeling pressure transient behavior of sectionally

heterogeneous reservoirs by the boundary element method.

Kikani_J, Horne_RN

Society of Petroleum Engineers of AIME, (Paper) SPE, 1989,

Vol.4, pp.19778 69-82

(83) Mold-cooling simulation in injection molding of three-

dimensional thin plastic parts.

Himasekhar_K, Wang_KK, Lottey_J

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1989, Vol.110, pp.129-136

(84) Application of boundary element methods to a transient

axisymmetric heat conduction problem.

Kavoosi_F, diMarzo_M, Baum_HR, Evans_DD

American Society of Mechanical Engineers, Heat Transfer

Division, (Publication) HTD, 1989, Vol.110, pp.79-85

(85) Quality Use of the Computer: Computational Mechanics,

Artificial Intelligence, Robotics, and Acoustic Sensing.

Cory_JF_Jr, Gordon_JL, Miyoshi_T, Suzuki_K

American Society of Mechanical Engineers, Pressure Vessels and

Piping Division (Publication) PVP, 1989, Vol.177, p.238p

(86) Simulation of sound field using boundary element method.

Nakagawa_K, Ohnishi_K, Ohta_K

Mitsubishi Heavy Industries, Mitsubishi Technical Bulletin, Jun

1989, No.188, p.7p

(87) Cyclic axial loading analysis of piles in sand.

Poulos_HG

Research Report - University of Sydney, School of Civil and

Mining Engineering, Jul 1988, No.R575

(88) Zastosowanie minimakesowej procedury optymalizacynej do

identyfiekacji warunkow brzegowych.

Application of MIN-MAX optimisation procedure to Identification

of boundary conditions.

Sikora_J, Pytlak_R

Rozprawy Elektrotechniczne, 1988, Vol.34, No.4, pp.1043-1050

(89) Prikaz uporabe metode robnih elementov v elastostatiki.

Application of the boundary element method in elastostatics.

Kogler_R

Strojniski Vestnik, Apr-Jun 1989, Vol.35, No.4-6, pp.91-96

(90) Coupling of boundary and finite elements for soil-structure

interaction problems.

VonEstorff_O, Kausel_E

Earthquake Engineering & Structural Dynamics, Oct 1989, Vol.18,

No.7, pp.1065-1075

(91) Dynamic vertical compliance of strip foundations in layered

soils.

Israil_ASM, Ahmad_S

Earthquake Engineering & Structural Dynamics, Oct 1989, Vol.18,

No.7, pp.933-950

(92) Time domain boundary element method for poroelasticity.

Dargush_GF, Banerjee_PK

International Journal for Numerical Methods in Engineering, Oct

1989, Vol.28, No.10, pp.2423-2449

(93) Improved procedure for solving transient heat conduction

problems using the boundary element method.

Davey_K, Hinduja_S

International Journal for Numerical Methods in Engineering, Oct

1989, Vol.28, No.10, pp.2293-2306

(94) Three-dimensional crack analysis using singular boundary

elements.

Jia_ZH, Shippy_DJ, Rizzo_FJ

International Journal for Numerical Methods in Engineering, Oct

1989, Vol.28, No.10, pp.2257-2273

(95) Boundary element approach for recovery of shape sensitivities

in three-dimensional elastic solids.

Barone_MR, Yang_RJ

Computer Methods in Applied Mechanics and Engineering, Sep

1989, Vol.74, No.1, pp.69-82

(96) Self-adaptive h-refinement technique for the boundary element

method.

Rencis_JJ, Jong_KY

Computer Methods in Applied Mechanics and Engineering, Aug

1989, Vol.73, No.3, pp.295-316

(97) Response of a vessel of LMFBR subjected to horizontal

excitations.

Kondo_H

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Aug 1989, Vol.55,

No.516, pp.1890-1895

(98) Use of boundary elements for the determination of the AGMA

geometry factor.

Vijayakar_SM, Houser_DR

Gear Technology, Jan-Feb 1988, Vol.5, No.1, pp.7-9, 33-37

(99) Pile behaviour - theory and application.

Poulos_HG

Geotechnique, Sep 1989, Vol.39, No.3, pp.365-415

(100) Highly storage-efficient hybrid finite element/boundary element

method for electromagnetic scattering.

Lee_SY

Electronics Letters, Sep 14 1989, Vol.25, No.19, pp.1273-1274

(101) Boundary element method for a non-linear free surface problem.

Campana_E, Lalli_F, Bulgarelli_U

International Journal for Numerical Methods in Fluids, Oct

1989, Vol.9, No.10, pp.1195-1206

(102) On the three-dimensional contact problem with quadratic

dependence of the rough layer displacements on pressure.

Poroshin_VS

Soviet Journal of Friction and Wear (English translation of

Trenie i Iznos), 1989, Vol.10, No.1, pp.66-68

(103) Advanced development of the boundary element method for steady-

state heat conduction.

Dargush_GF, Banerjee_PK

International Journal for Numerical Methods in Engineering, Sep

1989, Vol.28, No.9, pp.2123-2142

(104) Multi-domain general axisymmetric stress analysis by BEM.

Wang_HC, Banerjee_PK

International Journal for Numerical Methods in Engineering, Sep

1989, Vol.28, No.9, pp.2065-2083

(105) General and effective way for evaluating the integrals with

various orders of singularity in the direct boundary element

method.

Wu_Z, Xu_HR

International Journal for Numerical Methods in Engineering, Sep

1989, Vol.28, No.9, pp.2059-2064

(106) Free and forced vibrations of plates by boundary and interior

elements.

Providakis_CP, Beskos_DE

International Journal for Numerical Methods in Engineering, Sep

1989, Vol.28, No.9, pp.1977-1994

(1) In-situ stress measurement by double fracturing.

Sakuma_S, Kikuchi_S, Mizuta_Y, Serata_S

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Jun 1989, No.406 pt 3-11, pp.87-96

(2) 3-D infinite boundary elements and simulation of monolithic dam

foundations.

Zhang_C, Song_C, Wang_G, Jin_F

Communications in Applied Numerical Methods, Aug 1989, Vol.5,

No.6, pp.389-400

(3) New boundary element method coupled with FEM packages.

Luo_G

Communications in Applied Numerical Methods, Aug 1989, Vol.5,

No.6, pp.365-371

(4) Boundary element formulation for design sensitivities in

materially nonlinear problems.

Mukherjee_S, Chandra_A

Acta Mechanica, Jul 1989, Vol.78, No.3-4, pp.243-253

(5) Transonic interactive boundary-layer theory for laminar and

turbulent flow over swept wings.

Woodson_SH, DeJarnette_FR

NASA Contractor Reports, Oct 1988, No.4185, p.84p

(6) Optimum heating system design for compression molds.

Kwon_TH, Forcucci_SJ

Polymer Engineering and Science, 1989, Vol.29, No.15 Mid-Aug,

pp.1027-1038

(7) Methode des elements de frontiere. Resolution numerique des

problemes de diffusion thermique.

Boundary element method. Numerical resolution of thermal

diffusion problems.

Pasquetti_R, Caruso_A, Brebbia_CA

Revue Generale de Thermique, Apr 1989, Vol.28, No.328, pp.228-

234

(8) Boundary integral equation analysis for radiation and

scattering of elastic waves in three dimensions.

Huang_TH

Zhongguo Gongchen Xuekan/Journal of the Chinese Institute of

Engineers, Transactions of the Chinese Institute of

Engineers,Series A, Jul 1989, Vol.12, No.4, pp.425-438

(9) Determination of stress distributions around notches by

boundary element method.

Tarn_JQ, Wang_YB, Yeh_FY

Zhongguo Gongchen Xuekan/Journal of the Chinese Institute of

Engineers, Transactions of the Chinese Institute of

Engineers,Series A, Jul 1989, Vol.12, No.4, pp.415-424

(10) BEM shape optimization technique applied to cryosurgical probe

tip design.

Carter_SM, Barron_RF, Warrington_RO

Numerical Heat Transfer: An International Journal of

Computation and Methodology; Part A: Applications, Sep 1989,

Vol.16, No.2, pp.229-248

(11) Application of BEM to two-dimensional EPFM.

Ghorbanpoor_A, Zhang_J

BN: Proc Sess Relat Struct Mater Struct Congr 89., 1989, No.1989.,

pp.199-205

(12) Optimal design of MRI magnets with magnetic shielding.

Ishiyama_A, Hondoh_M, Ishida_N, Onuki_T

IEEE Transactions on Magnetics, Mar 1989., Vol.25, No.2,

pp.1885-1888

(13) Ausbreitung transienter akustischer Wellen-Untersuchungen mit

einer Zeitschritt-Randelementmethode.

Propagation of transient acoustic waves - analysis by time-

stepping boundary element method.

Antes_H, vonEstorff_O

Ingenieur-Archiv, 1989, Vol.59, No.1, pp.17-31

(14) Analysis of elastodynamic problems based on the principle of

superposition (extention of the body force method to

elastodynamic problems).

Chen_Dh, Nisitani_H, Noguchi_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jul 1989, Vol.55,

No.515, pp.1584-1592

(15) Transient elastodynamic boundary element analysis based on

time-stepping scheme (study on one-dimensional problems).

Tanaka_M, Matsumoto_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jul 1989, Vol.55,

No.515, pp.1577-1583

(16) Boundary element analysis of three dimensional anisotropic

elastic body with a crack.

Ishikawa_H, Takagi_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jul 1989, Vol.55,

No.515, pp.1554-1559

(17) BEM analysis of a cylindrical three-point bend specimen with a

chevron crack for fracture toughness test of rock.

Hayashi_K, Ono_A, Abe_H

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Jul 1989, Vol.32, No.3, pp.427-431

(18) On the discretization of a shape by the boundary element method

in 2-D elastostatics.

Sawada_T, Ye_GW

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Jul 1989, Vol.32, No.3, pp.362-367

(19) Boundary element approach for identification of point forces of

distributed parameter systems.

Ohnaka_K, Uosaki_K

International Journal of Control, Jan 1989, Vol.49, No.1,

pp.119-127

(20) Boundary element method in cascade flow computation.

Zamani_NG

Mathematics and Computers in Simulation, Jul 1989, Vol.31,

No.3, pp.221-226

(21) Boundary element method for 2D problems of ideal fluid flows

with free boundaries.

Pasheva_V, Lazarov_R

Advances in Water Resources, Mar 1989, Vol.12, No.1, pp.37-45

(22) Time dependent transport problems by BEM.

Skerget_P, Kuhn_G, Alujevic_A, Brebbia_CA

Advances in Water Resources, Mar 1989, Vol.12, No.1, pp.9-20

(23) Study of accurate analysis system through the boundary element

methods: (1st Report. Introduction of integral equation with

relative quantity).

Kisu_H, Kawahara_T

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Jun 1989, Vol.55,

No.514, pp.1562-1568

(24) Application of the surface-singularity method to wing-body-tail

configurations.

Choi_JS, Chang_KS, Sugiyama_Y

Memoirs of the Faculty of Engineering, Nagoya University, 1988,

Vol.40, No.2, pp.337-350

(25) Analiza plyt na polprzestrzeni sprezystej z wiezami

jednostronnymi.

Analysis of plates on an elastic half-space with unilateral

constraints.

Cyrok_G, Switka_R

Archiwum Inzynierii Ladowej, 1988, Vol.34, No.2, pp.155-174

(26) Obliczanie macierzy mas powietrza do analizy przekryc

ciegnowych i membranowych.

Calculation of the air mass matrix for analyzing cable networks

and membrane structures.

Sygulski_R

Archiwum Inzynierii Ladowej, 1988, Vol.34, No.1, pp.23-34

(27) Dynamic dipole tracing of electric sources in the human brain.

Musha_T

IEEE/Engineering in Medicine and Biology Society Annual

Conference, 1988, pp.430-431

(28) Computer simulator of electrocardiographic process.

Musha_T, Wei_D, Harumi_Ki, Yamada_G, Matsuura_T, Nakamura_T

IEEE/Engineering in Medicine and Biology Society Annual

Conference, 1988, pp.193-194

(29) Analysis of electric field for measurement while drilling using

combined FEM with BEM.

Maekawa_T, Jitsumori_A, Inoue_S, Shibuya_Y, Okumura_N,

Akizuki_K

CPEM Digest (Conference on Precision Electromagnetic

Measurements), 1988, pp.289-290

(30) Semianalytical modeling of pressure transients in fractured

reservoirs.

vanKruysdijk_CPJW

Society of Petroleum Engineers of AIME, (Paper) SPE, 1988,

Vol.OMEGA, pp.619-630 18169

(31) Pressure transient analysis of arbitrary shaped reservoirs with

the boundary element method.

Kikani_J, Horne_RN

Society of Petroleum Engineers of AIME, (Paper) SPE, 1988,

Vol.OMEGA, pp.519-529 18159

(32) Boundary element method for fluid-structure interaction

problems in liquid storage tanks.

Hwang_IT, Ting_K

BN: Int Symp Flow Induced Vib Noise Nonlinear Interact Eff Chaotic

Motion, 1988., No.1988., pp.225-239

(33) 3D higher order boundary element method for wave forces on

offshore structures.

Tong_KC

Proceedings of the International Offshore Mechanics and Arctic

Engineering Symposium, 1989, Vol.6, No.8th, pp.17-27

(34) Application of boundary element method to the fluid-body

interaction problem.

Takagi_K, Naito_S

Proceedings of the International Offshore Mechanics and Arctic

Engineering Symposium, 1989, Vol.6, No.8th, pp.9-15

(35) Boundary element calculations of the motion of floating bodies.

Wrobel_LC, Esperanca_PTT, Vasconcelos_JMA

Proceedings of the International Offshore Mechanics and Arctic

Engineering Symposium, 1989, Vol.6, No.8th, pp.1-8

(36) Boundary element formulation in finite deformation plasticity

using implicit integration.

Jin_H, Mattiasson_K

Computers and Structures, 1989., Vol.31, No.1, pp.25-34

(37) Waveguide discontinuity analysis with a coupled finite-boundary

element method.

Wu_KL, Delisle_GY, Fang_DG, Lecours_M

IEEE Transactions on Microwave Theory and Techniques, 1989,

No.6 J, pp.993-998

(38) Direkte und indirekte Randelementmethoden zur Bestimmung der

Lage des Schubmittelpunktes beliebig geformter

Stabquerschnitte.

Direct and indirect boundary element methods for determining

the shear center of arbitrarily shared rod cross sections.

Athanasiadis_G

Forschung im Ingenieurwesen, Mar 1989, Vol.55, No.2, pp.39-50

(39) Automated mesh division of surfaces of solid objects composed

of free-form surfaces.

Yokoyama_M, Kuramoto_T

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jun 1989, Vol.55,

No.514, pp.1562-1567

(40) Boundary element methods in probabilistic structural analysis

(PBEM).

Ettouney_M, Benaroya_H, Wright_J

Applied Mathematical Modelling, Jul 1989, Vol.13, No.7, pp.432-

441

(41) Analysis of some inverse problems in elastodynamics by the

boundary element method.

Tanaka_M, Nakamura_M, Yamagiwa_K, Nakayama_C

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jun 1989, Vol.55,

No.514, pp.1445-1452

(42) Boundary element analysis of steady-state heat conduction and

thermal stresses in the LSI package.

Sato_M, Yuuki_R, Yoshioka_S

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jun 1989, Vol.55,

No.514, pp.1437-1444

(43) Self-adaptive mesh refinement technique for acquiring the

desired accuracy in boundary element analyses.

Sasaki_S, Yokoyama_M

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jun 1989, Vol.55,

No.514, pp.1416-1422

(44) Analytical study on the dynamic stress concentration factor by

the three-dimensional boundary element method.

Matsumoto_H, Adachi_T, Yoshida_S, Ujihashi_S

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jun 1989, Vol.55,

No.514, pp.1400-1406

(45) Numerical analyses of two-dimensional thermal stress under

point and line heat generation.

Ochiai_Y

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jun 1989, Vol.55,

No.514, pp.1433-1436

(46) Linear shock cell model for jets of arbitrary exit geometry.

Morris_PJ, Bhat_TRS, Chen_G

Journal of Sound and Vibration, Jul 22 1989, Vol.132, No.2,

pp.199-211

(47) Problem stempla o podstawie plaskiej z wiezami jednostronnymi.

Problem of a flat-bottomed punch with unilateral constraints.

Cyrok_G, Switka_R

Rozprawy Inzynierskie, 1988, Vol.36, No.1, pp.65-85

(48) Local boundary integral equation analysis of 2-dimensional

potential problems using Fourier series.

Askin_S, Fenner_RT

Communications in Applied Numerical Methods, Jul 1989, Vol.5,

No.5, pp.321-328

(49) Hybrid finite-element method and boundary-element method using

time-stepping for eddy-current calculation in axisymmetric

problems.

Pichon_L, Razek_A

IEE Proceedings, Part A: Physical Science, Measurement and

Instrumentation, Management and Education, Reviews, 1989,

Vol.1, No.J, pp.217-222

(50) Acoustic intensity analysis system based on boundary element

method and its applications.

Tanaka_M, Yazaki_S

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, May 1989, Vol.55,

No.513, pp.1187-1192

(51) Stress intensity factor analysis by combination of boundary

element and finite element methods (application to mixed-mode

crack problems).

Miyazaki_N, Ikeda_T, Munakata_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1989, Vol.55,

No.513, pp.1180-1184

(52) Longitudinal impact of a bar on an elastic support. (1st

report, calculation by boundary element method, and

experiment).

Fukatsu_K, Ito_M, Kagami_M

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, May 1989, Vol.55,

No.513, pp.1106-1111

(53) 3-D boundary element method for cracks in a plate.

Fares_N, Li_VC

International Journal for Numerical Methods in Engineering, Jul

1989, Vol.28, No.7, pp.1703-1713

(54) Reusable Intrinsic Sample Point (RISP) algorithm for the

efficient numerical integration of three dimensional curved

boundary elements.

Kane_JH, Gupta_A, Saigal_S

International Journal for Numerical Methods in Engineering, Jul

1989, Vol.28, No.7, pp.1661-1676

(55) Comparison between isoparametric Lagrangian elements in 2D BEM.

Deb_A, Banerjee_PK

International Journal for Numerical Methods in Engineering, Jul

1989, Vol.28, No.7, pp.1539-1555

(56) Soil-structure interaction experiment using impulse response.

Mita_A, Yoshida_K, Kumagai_S, Shioya_K

Earthquake Engineering & Structural Dynamics, Jul 1989, Vol.18,

No.5, pp.727-744

(57) Calculation of the effective thermal conductivity of media with

regularly dispersed parallel cylinders.

Oshima_N, Watari_N

JSME International Journal, Series 2: Fluids Engineering, Heat

Transfer, Power, Combustion, Thermophysical Properties, May

1989, Vol.32, No.2, pp.225-230

(58) Prediction of gas diffusion in complicated terrain by a

potential flow model.

Ohba_R, Okabayashi_K, Okamoto_H

Atmospheric Environment, 1989, Vol.23, No.1, pp.71-80

(59) Boundary integral solution to the prismatic beam problem.

Gipson_GS

Computers and Structures, 1989, Vol.31, No.4, pp.523-530

(60) Formulation and integration of continuous and discontinuous

quadratic boundary elements for two dimensional potential and

elastostatics.

Dyka_CT, Millwater_HR

Computers and Structures, 1989, Vol.31, No.4, pp.495-504

(61) Boundary element analysis of sound fields around enclosures

with circular apertures.

Nishida_K, Fujitsuka_K

JSME International Journal, Series 3: Vibration, Control

Engineering, Engineering for Industry, Mar 1989, Vol.32, No.1,

pp.44-50

(62) Analytic solution to the Poisson equation in some plane

domains.

Homentcovschi_D

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.212-214

(63) On the accuracy of continuous and discontinuous boundary

elements.

Parreira_P

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.205-211

(64) Nonisoparametric formulations for the three-dimensional

boundary element method.

Aliabadi_MH, Hall_WS

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.198-204

(65) FEM and/or BEM for numerical simulation of Marangoni flow.

Gheorghiu_CI

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.195-197

(66) Analysis of transient response of SH wave scattering in a half

space by the boundary element method.

Hirai_H

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.189-194

(67) Free vibration analysis of elastic plate structures by boundary

element method.

Tanaka_M, Yamagiwa_K, Miyazaki_K, Ueda_T

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.182-188

(68) Application of p-version FEM to gear teeth peak stress

valuation.

Pidello_A, Strona_PP, Raffa_FA

Engineering Analysis, Dec 1988, Vol.5, No.4, pp.170-176

(69) Finite and boundary element approach to process simulation with

conjugate gradient-based method.

Hane_M, Hane_K

BN: NASECODE, 1987, pp.219-224

(70) Parameter study of remote field eddy current testing.

Kikuta_T, Yamagishi_T, Tsuboi_H

Proceedings of the International Offshore Mechanics and Arctic

Engineering Symposium, 1989, Vol.I (of V, pp.371-377

(71) Wave force on a curtain-wall-type breakwater due to obliquely

incident waves.

Sekimoto_T, Kondo_K, Ohshimo_T

BN: Twenty First Costal Eng Conf, 1988, Vol.3, pp.2430-2444

(72) Comparison of boundary element and finite element methods in

spur gear root stress analysis.

Sun_H, Mavriplis_D, Huston_RL, Oswald_FB

BN: Proc 1989 Int Power Transm Gearing Conf New Technol Power

Transm 90., 1989, No.1989., pp.163-166

(73) Acoustic modeling method for the design of machine system

enclosures, with experimental verification.

Oppenhiemer_CH, Dubowsky_S

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1988, Vol.15-2, No.PT2, pp.433-440

(74) Computation accuracies of boundary element method and finite

element method in transient eddy current analysis.

Tsuboi_H, Tanaka_M, Misaki_T, Naito_T

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.3174-3176

(75) Computation of three-dimensional electromagnetic field in the

eddy-current testing of steel pipes.

Tsuboi_H, Misaki_T, Kikuta_T

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.3168-3170

(76) Coupled BE-IBC formulation for multiple conductor eddy current

problems.

Ahmed_MR, Lavers_JD, Burke_PE

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2524-2526

(77) Boundary element method to predict the shape of a molten metal

free surface in EM confinement field.

Lavers_JD, Ahmed_MR

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2521-2523

(78) Three-dimensional boundary-element method for magnetic

diffusion model.

Tanaka_Y, Honma_T

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2518-2520

(79) Sub-triangulation method to improve the accuracy of singular

integral evaluation in 3-D boundary element methods.

Kalaichelvan_S, Lavers_JD

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2515-2517

(80) Consideration on the computational error of the boundary

integral equation method for magnetostatic field problems.

Morisue_T

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2509-2511

(81) Hybrid finite element/boundary element analysis for

axisymmetric magnetostatic fields.

DAngelo_J, Mayergoyz_I, Palmo_M

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2506-2508

(82) Impedance boundary condition in the boundary element-vector

potential formulation.

Subramaniam_S, Hoole_SRH

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2503-2505

(83) Boundary element analysis of axisymmetric resonant cavities.

Tsuchimoto_M, Honma_T, Yoneta_A

IEEE Transactions on Magnetics, Nov 1988., Vol.24, No.6,

pp.2500-2502

(84) Full-wave acoustic logging in an irregular borehole.

Bouchon_M, Schmitt_DP

Geophysics, Jun 1989, Vol.54, No.6, pp.758-765

(85) New boundary equation solution to the plate problem.

Katsikadelis_JT, Armenakas_AE

Journal of Applied Mechanics, Transactions ASME, Jun 1989,

Vol.56, No.2, pp.364-374

(86) New boundary integral equation formulation for elastodynamic

and elastostatic crack analysis.

Zhang_C, Achenbach_JD

Journal of Applied Mechanics, Transactions ASME, Jun 1989,

Vol.56, No.2, pp.284-290

(87) La methode des elements de frontiere: un outil pour

l'ingenieur.

The boundary element method: a tool for the engineer.

Migeot_JL

Revue M. Mecanique, Jun 1988, Vol.32, No.3-4, p.7p

(88) Energy and reaction operators in variational expressions for

radiation problems.

Biehl_FJ

AEU, Archiv fuer Elektronik und Uebertragungstechnik:

Electronics and Communication, May-Jun 1989, Vol.43, No.3,

pp.166-174

(89) Suppression of irregular frequency effects in fluid-structure

interaction problems using a combined boundary integral

equation method.

Lau_SM, Hearn_GE

International Journal for Numerical Methods in Fluids, Jul

1989, Vol.9, No.7, pp.763-782

(90) Rigid-body translation with curved boundary elements.

Guiggiani_M, Casalini_P

Applied Mathematical Modelling, Jun 1989, Vol.13, No.6, pp.365-

368

(91) Three-dimensional flow analysis through swept turbine cascade

spanning parallel walls.

Nishiyama_T, Manome_T, Kurosawa_S, Ota_T

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Apr 1989, Vol.55,

No.512, pp.1115-1122

(92) Evaluation of the fracture toughness of optical glass fibers

using real fiber specimens.

Muraoka_M, Abe_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Apr 1989, Vol.55,

No.512, pp.798-801

(93) Boundary element analysis of an inverse problem in galvanic

corrosion.

Kishimoto_K, Miyasaka_H, Aoki_S

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Apr 1989, Vol.32, No.2, pp.256-262

(94) Stress concentrations at holes in thin rotating discs.

Ang_HE, Tan_CL

Journal of Strain Analysis for Engineering Design, Oct 1988,

Vol.23, No.4, pp.223-225

(95) Stress intensity factor analyses of interaction elliptical

cracks using line-spring boundary element method.

Miyazaki_N, Kaneko_H, Munakata_T

International Journal of Pressure Vessels and Piping, 1989,

Vol.38, No.1, pp.1-14

(96) Stress singularity and notch stress at the contour model of the

spot-welded joint.

Radaj_D

Schweissen und Schneiden, Mar 1989, No.3, pp.E36-E38

(97) Computational environment for the simulation of fracture

processes in three dimensions.

Wawrzynek_PA, Martha_LF, Ingraffea_AR

AMD (Symposia Series) (American Society of Mechanical

Engineers, Applied Mechanics Division), 1988, Vol.91, pp.321-

327

(98) Boundary element method for 3-D cracks in a plate.

Fares_N, Li_VC

AMD (Symposia Series) (American Society of Mechanical

Engineers, Applied Mechanics Division), 1988, Vol.91, pp.113-

124

(99) Modified boundary integral formulation for the study of 3-D

crack problems in plates.

Benitez_FG, Rosakis_AJ

AMD (Symposia Series) (American Society of Mechanical

Engineers, Applied Mechanics Division), 1988, Vol.91, pp.99-112

(100) Development of an integrated BEM for hot fluid-structure

interaction.

Dargush_GF, Banerjee_PK

American Society of Mechanical Engineers (Paper), 1989,

No.1989., p.11p

(101) New algorithm for inverse design of flow headers.

Araya_R, Modi_V

American Society of Mechanical Engineers, Design Engineering

Division (Publication) DE, 1988, Vol.14, pp.333-336

(102) Source parameter estimation in inhomogeneous volume conductors

of arbitrary shape.

Oostendorp_TF, vanOosterom_A

IEEE Transactions on Biomedical Engineering, Mar 1989, Vol.36,

No.3, pp.382-391

(103) Boundary integration and interpolation procedures for plate

bending.

AbdelAkher_A, Hartley_GA

International Journal for Numerical Methods in Engineering, Jun

1989, Vol.28, No.6, pp.1389-1408

(104) Adaptive h-, p- and hp-versions for boundary integral element

methods.

Rank_E

International Journal for Numerical Methods in Engineering, Jun

1989, Vol.28, No.6, pp.1335-1349

(105) Infinite boundary elements.

Beer_G, Watson_JO

International Journal for Numerical Methods in Engineering, Jun

1989, Vol.28, No.6, pp.1233-1247

(106) Elastic analysis for piled raft foundations in a homogeneous

soil.

Kuwabara_F

Soils and Foundations, Mar 1989, Vol.29, No.1, pp.82-92

(107) Boundary element investigation of natural convection problems.

Tanaka_M, Kitagawa_K, Brebbia_CA, Wrobel_LC

Advances in Water Resources, Sep 1988, Vol.11, No.3, pp.139-143

(108) Boundary element methods applied to transport phenomena.

Onishi_K

Advances in Water Resources, Sep 1988, Vol.11, No.3, pp.133-138

(109) Dynamic boundary element method and its application to dynamic

analysis of soil-structure interaction.

Zhou_X, Wu_Z, Chen_H

Tianjin Daxue Xuebao/Journal of Tianjin University, 1988, No.3,

pp.66-77

(110) Computation of thermal stresses in quasi-static non-stationary

thermoelasticity using boundary elements.

Sladek_V, Sladek_J

International Journal for Numerical Methods in Engineering, May

1989, Vol.28, No.5, pp.1131-1144

(111) Bi-cubic transformation for the numerical evaluation of the

Cauchy Principal Value integrals in boundary methods.

Cerrolaza_M, Alarcon_E

International Journal for Numerical Methods in Engineering, May

1989, Vol.28, No.5, pp.987-999

(112) Boundary element method for some inverse problems in

elastodynamics.

Tanaka_M, Yamagiwa_K

Applied Mathematical Modelling, May 1989, Vol.13, No.5, pp.307-

312

(113) On a certain boundary integral equation of the theory of

elasticity on a contour with a cusp point.

Dynkin_EM, Emelyanov_AP

Leningrad University Mechanics Bulletin (English Translation of

Vestnik Leningradskogo Universiteta, Mekhanika), 1988, No.3,

pp.40-43

(114) Boundary-only procedure for transient transport problems with

or without first-order chemical reaction.

Aral_M, Tang_Y

Applied Mathematical Modelling, Mar 1989, Vol.13, No.3, pp.130-

137

(115) Thin plates of variable thickness with linear flexural

rigidity.

Ye_J, Xiao_H

Communications in Applied Numerical Methods, Apr 1989, Vol.5,

No.3, pp.153-158

(116) Transient scattering of elastic waves by dipping layers of

arbitrary shape: Part 1. Antiplane strain model.

Eshraghi_H, Dravinski_M

Earthquake Engineering & Structural Dynamics, Apr 1989, Vol.18,

No.3, pp.397-415

(117) Using boundary element method to calculate the displacement

field and the stress field on the stands of the 1700mm

continuous cold rolling mills in Wuhan Steel Works.

Shen_G, Zou_L, Xiao_H, Zhang_Y

Jixie Gongcheng Xuebao/Chinese Journal of Mechanical

Engineering, Dec 1988, Vol.24, No.4, pp.63-69

(118) Shape changes in electrochemical polishing: The effect of

temperature on the anodic leveling of Fe-24Cr.

Matlosz_M, Landolt_D

Journal of the Electrochemical Society, Apr 1989, Vol.136,

No.4, pp.919-929

(119) Boundary elements: The other analysis.

Trevelyan_J

CAE, Computer-Aided Engineering, Mar 1989, Vol.8, No.3, p.3p

(120) Highly sensitive thin film magnetoresistive sensor with good

linearity.

Endoh_M, Shimizu_N, Yoda_H, Waoatsuki_N

BN: Fifth IEEE CHMT Int Electron Manuf Technol Symp Proc, 1988,

No.1988, pp.210-214

(121) Numerical evaluation of the performance of active noise control

systems.

Mollo_CG, Bernhard_RJ

American Society of Mechanical Engineers (Paper), 1988,

No.1988., p.9p

(122) Charged particle trajectories in electrostatic fields.

Tanasescu_FT, Cramariuc_R, Toma_I, Ionescu_I

Journal of Electrostatics, Apr 1989., Vol.23, pp.453-462

(123) Extended integral equation formulation for scattering problems

from a cylindrical scatterer.

Toyoda_I, Matsuhara_M, Kumagai_N

IEEE Transactions on Antennas and Propagation, Nov 1988,

Vol.36, No.11, pp.1580-1586

(124) Boundary-finite element method to compute directly electric

field intensity with high accuracy.

Yamashita_H, Shinozaki_K, Nakamae_E

IEEE Transactions on Power Delivery, Oct 1988, Vol.3, No.4,

pp.1754-1760

(125) Calculation of thermal fields of underground cables using the

boundary element method.

Gela_G, Dai_JJ

IEEE Transactions on Power Delivery, Oct 1988, Vol.3, No.4,

pp.1341-1347

(126) Singular quadratic boundary elements and its application to

fracture analysis around the heel of gravity dams.

Bai_C, Zhao_D

Tumu Gongcheng Xuebao/China Civil Engineering Journal, May

1988, Vol.21, No.2, pp.42-50

(127) Boundary element analysis of cavity noise problems with

complicated boundary conditions.

Suzuki_S, Maruyama_S, Ido_H

Journal of Sound and Vibration, Apr 8 1989, Vol.130, No.1,

pp.79-96

(128) Transient dynamic elastic frictional contact: A general 2D

boundary element formulation with examples of SH motion.

Mendelsohn_DA, Doong_JM

Wave Motion, Mar 1989, Vol.11, No.1, pp.1-21

(129) Analysis of cracked laminates with holes using the boundary

force method.

Tan_PW, Bigelow_CA

AIAA Journal, Sep 1988, Vol.26, No.9, pp.1094-1099

(130) Boundary element analysis of stress intensity factors for an

interface crack in dissimilar materials.

Yuuki_R, Cho_SB

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Feb 1989, Vol.55,

No.510, pp.340-347

(131) Study on the thermal stress at ceramics-metal joint.

Seo_K, Kusaka_M, Nogata_F, Terasaki_T, Nakao_Y, Saida_K

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Feb 1989, Vol.55,

No.510, pp.312-317

(132) Unifying treatment of body force method and boundary element

method (Proposal of a general method of numerical analysis

based on the principle of superposition).

Chen_DH, Nisitani_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Feb 1989, Vol.55,

No.510, pp.285-292

(133) Boundary element elastic analysis on the basis of a consistent

formulation.

Nappi_A

Applied Mathematical Modelling, Apr 1989, Vol.13, No.4, pp.234-

241

(134) Two-dimensional singularity solutions in the presence of an

elliptical hole.

Denda_M

Journal of Applied Mechanics, Transactions ASME, Mar 1989,

Vol.56, No.1, pp.231-233

(135) Study on an identification method of residual stresses in a

plate by inverse analysis.

Tomishima_T, Yada_T

JSME International Journal, Series 1: Solid Mechanics, Strength

of Materials, Jan 1989, Vol.32, No.1, pp.31-37

(136) Prediction of polymer melt extrudate swell using a differential

constitutive model.

Bush_MB

Journal of Non-Newtonian Fluid Mechanics, Feb 1989, Vol.31,

No.2, pp.179-191

(137) Improving near boundary analysis for boundary element methods

in elastostatics.

Johnson_GC, ThorntonTrump_AB

BN: Comput Eng, 1988, No.1988, pp.369-375

(138) Radiation and scattering of acoustic waves from bodies of

arbitrary shape in a three-dimensional half space.

Seybert_AF, Soenarko_B

American Society of Mechanical Engineers (Paper), 1987, p.6p

(139) Adopting lenses to meet upscale broadcast cameras.

Hosoya_J

JEE, Journal of Electronic Engineering, Mar 1988, Vol.25,

No.255, pp.47-49

(140) Analysis of sound field in a cabin using the boundary element

method (2nd report, comparison between computation and

experimental results for real size cabin with a rigid wall made

of plaster).

Utsuno_H, Tanaka_T, Morita_S, Nishibe_M

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jan 1989, Vol.55,

No.509, pp.73-78

(141) Analysis of sound field in a cabin using the boundary element

method (1st report, comparison between computation and

experimental results for real size cabin with rigid wall made

of plaster).

Nishibe_M, Morita_S, Tanaka_T, Utsuno_H

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jan 1989, Vol.55,

No.509, pp.67-72

(142) Boundary element analyses of sound fields around barriers and

the attenuation.

Nishida_K, Fujitsuka_K

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jan 1989, Vol.55,

No.509, pp.58-66

(143) Analysis of groove guide for short-millimeter waves.

Tamura_H, Kurazono_S

Electronics & Communications in Japan. Part II: Electronics,

Dec 1988, Vol.71, No.12, pp.63-73

(144) Ridge-shaped narrow-wall directional coupler. Tight coupling

and high-power handling capability.

Tanaka_T, Aikawa_M

Electronics & Communications in Japan. Part II: Electronics,

Dec 1988, Vol.71, No.12, pp.54-62

(145) Fourier integral representation of curvilinear influence

functions applied to surface structures.

Muc_A, Zielinski_AP

Thin-Walled Structures, 1989, Vol.7, No.2, pp.85-98

(146) Synthesis of indeterminate shaft of structural shape based on

boundary element method.

Nakagiri_S, Suzuki_K

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jan 1989, Vol.55,

No.509, pp.106-111

(147) Stress intensity factor analysis by combination of boundary

element and finite element methods (Application of two-

dimensional crack problems).

Miyazaki_N, Ikeda_T, Munakata_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jan 1989, Vol.55,

No.509, pp.101-105

(148) Study on inelastic analysis using the boundary element method

(2nd report, study on the boundary element 3-dimensional

thermal elastic plastic creep analysis).

Iwasaki_R, Ishizaki_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jan 1989, Vol.55,

No.509, pp.96-100

(149) p-Adaptive BIEM approach for two-dimensional elasticity

analysis.

Cerrolaza_M, Alarcon_E

Microcomputers in Civil Engineering, Mar 1989, Vol.4, No.1,

pp.11-20

(150) Invariant imbedding method for singular integral evaluation on

finite domains.

Vijayakumar_S, Cormack_DE

SIAM Journal on Applied Mathematics, Dec 1988, Vol.48, No.6,

pp.1335-1349

(1) Solution of the characteristic impedance of an arbitrarily

shaped TEM transmission line using complex variable boundary

element method (CVBEM).

Geyi_W, Liu_X, Wu_W

IEE Proceedings, Part H: Microwaves, Antennas and Propagation,

Feb 1989, Vol.136, No.1, pp.73-75

(2) Numerical simulation of the hydrodynamic interaction between a

sedimenting particle and a neutrally buoyant particle.

Ingber_MS

International Journal for Numerical Methods in Fluids, Mar

1989, Vol.9, No.3, pp.263-273

(3) Unsteady thermal stress analysis in compound region by means of

thermoelastic displacement potential and boundary-element

method.

Ochiai_Y, Sekiya_T

Journal of Thermal Stresses, 1989, Vol.12, No.1, pp.57-65

(4) Numerical calculation of capacitances, permeances and

electrical conductivity.

Mayer_D

Acta Technica CSAV (Ceskoslovensk Akademie Ved), 1988, Vol.33,

No.4, pp.509-516

(5) Boundary element method for analysing repair patches on cracked

finite sheets.

Young_A, Cartwright_DJ, Rooke_DP

Aeronautical Journal, Dec 1988, Vol.92, No.920, pp.416-421

(6) Investigation of the acoustic properties of vibrating finite

cylinders.

Fyfe_KR, Ismail_F

Journal of Sound and Vibration, Feb 8 1989, Vol.128, No.3,

pp.361-376

(7) Efficient quadrature for a boundary element method to compute

three-dimensional stokes flow.

Varnhorn_W

International Journal for Numerical Methods in Fluids, Feb

1989, Vol.9, No.2, pp.185-191

(8) Three-dimensional nonlinear boundary element solution for

potential flow in hydraulic machinery.

Yan_C, Wu_Y, Mei_Zy

American Society of Mechanical Engineers, Fluids Engineering

Division (Publication) FED, 1988, Vol.68, pp.115-120

(9) Computer modelling of galvanic corrosion.

Adey_RA, Niku_SM

ASTM Special Technical Publication, 1988, pp.96-117

(10) Fifth international symposium on hydro power fluid machinery

(Presented at the winter annual meeting of the American Society

of mechanical engineers).

Froelich_DR, Wagner_SK, Webb_DR

American Society of Mechanical Engineers, Fluids Engineering

Division (Publication) FED, 1988, Vol.68, p.120p

(11) Hydrodynamic pressure on gravity dams subjected to ground

motions.

Tsai_CS, Lee_GC

Journal of Engineering Mechanics, Mar 1989, Vol.115, No.3,

pp.598-617

(12) Boundary element method analysis of electrostatics in a tank

during filling operations.

SidiYekhlef_A, Sunderland_JE

International Journal for Numerical Methods in Engineering, Feb

1989, Vol.28, No.2, pp.315-329

(13) Three-dimensional resonance of axisymmetric sediment-filled

valleys.

Jiang_T, Kuribayashi_E

Soils and Foundations, Dec 1988, Vol.28, No.4, pp.130-146

(14) Boundary element analysis for convective diffusion problems

adjacent to diffusion domains.

Tanaka_Y, Honma_T

Applied Mathematical Modelling, Feb 1989, Vol.13, No.2, pp.115-

121

(15) Evaluation of the normal derivative along the boundary in the

direct boundary element method.

Ingber_MS, Mitra_AK

Applied Mathematical Modelling, Jan 1989, Vol.13, No.1, pp.32-

40

(16) Bending of circular plates supported at number of points.

Raamachandran_J, BhaskaraReddy_GC

Journal of Engineering Mechanics, Feb 1989, Vol.115, No.2,

pp.437-441

(17) Domain integration for plate bending analysis by the boundary

element method.

AbdelAkher_A, Hartley_GA

Communications in Applied Numerical Methods, Jan 1989, Vol.5,

No.1, pp.23-28

(18) Calculation of interior values by the boundary element method.

Paulsen_KD, Lynch_DR

Communications in Applied Numerical Methods, Jan 1989, Vol.5,

No.1, pp.7-14

(19) Photochemical synthesis of block polymers of poly(bisphenol a

carbonate) with vinyl monomers.

Doi_T, Smets_G

Macromolecules, Jan 1989, Vol.22, No.1, pp.25-29

(20) Scattering by a finite periodic array of strips.

Takenaka_T

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1988, No.1988., pp.634-637

(21) Eigen-weighted BIEM for solving arbitrary cross-section

waveguide.

Zhu_L, Zhang_WX

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1988, No.1988., pp.589-592

(22) Electromagnetic scattering from an arbitrary dielectric coated

conducting cylinder by coupled finite-boundary element method.

Wu_KL, Delisle_GY, Fang_DG

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1988, No.1988., pp.380-383

(23) Feedback formulation for multiple scatterers.

Cruellas_JC, Ferrando_M

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1988, No.1988., pp.400-403

(24) Methodology of boundary methods.

Zhang_WX

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1988, No.1988., pp.299-302

(25) C.A.D. for Hermes antennas.

Lenormand_R, Blanchard_I, Clair_D, Tourneur_J, Bannelier_P,

Brochard_C, Martinaud_JP

AP-S International Symposium (Digest) (IEEE Antennas and

Propagation Society), 1988, No.1988., pp.26-29

(26) Boundary element method on the ICL DAP.

Davies_AJ

Parallel Computing, Oct 1988., Vol.8, No.1-3, pp.335-343

(27) Numerical simulation of mold heat transfer of injection molded

plastic parts using a modified three-dimensional boundary

element method.

Himasekhar_K

International Communications in Heat and Mass Transfer, Jan-Feb

1989, Vol.16, No.1, pp.55-64

(28) Evaluation of boundary integrals for plate bending.

AbdelAkher_A, Hartley_GA

International Journal for Numerical Methods in Engineering, Jan

1989, Vol.28, No.1, pp.75-93

(29) Computation of stresses and displacements.

Caldwell_J, McLeod_AJ

Advances in Engineering Software, Oct 1988, Vol.10, No.4,

pp.183-190

(30) Boundary element analysis of stress around the bottom outlet.

Yang_J, Zang_J

Advances in Engineering Software, Oct 1988, Vol.10, No.4,

pp.210-214

(31) Novel displacement gradient boundary element method for elastic

stress analysis with high accuracy.

Okada_H, Rajiyah_H, Atluri_SN

Journal of Applied Mechanics, Transactions ASME, Dec 1988,

Vol.55, No.4, pp.786-794

(32) Radio frequency simulation of a complex printed circuit board

layout by the quasi-static boundary element method.

Milsom_RF, Scott_KJ

International Journal of Numerical Modelling: Electronic

Networks, Devices and Fields, Sep 1988, Vol.1, No.3, pp.165-170

(33) Multiple crack propagation in a strip caused by thermal shock.

Bahr_HA, Weiss_HJ, Maschke_HG, Meissner_F

Theoretical and Applied Fracture Mechanics, Dec 1988, Vol.10,

No.3, pp.219-226

(34) Analysis of potential and current density distributions using a

Boundary Element Method.

Aoki_S, Kishimoto_K, Miyasaka_M

Corrosion (Houston), Dec 1988, Vol.44, No.12, pp.926-932

(35) Boundary element analysis by linearized nonlinear elastic

material models: An application to no-tension systems.

Nappi_A, Perego_U

Engineering Structures, Jul 1988, Vol.10, No.3, pp.146-156

(36) Solution of the resonant frequencies of a cavity resonator by

Boundary Element Method (BEM).

Geyi_W, Hongshi_W

IEE Proceedings, Part H: Microwaves, Antennas and Propagation,

Dec 1988, Vol.135, No.6, pp.361-365

(37) Boundary integral method for internal piece-wise smooth crack

problems.

Zang_W, Gudmundson_P

International Journal of Fracture, Dec 1988, Vol.38, No.4,

pp.275-294

(38) Mold cooling system design using boundary element method.

Kwon_TH

Journal of Engineering for Industry, Transactions ASME, Nov

1988, Vol.110, No.4, pp.384-394

(39) Boundary element method applied to certain structural-acoustic

coupling problems.

Tanaka_M, Masuda_Y

Computer Methods in Applied Mechanics and Engineering, Nov

1988, Vol.71, No.2, pp.225-234

(40) On the symmetrization of the BEM formulation.

Kanarachos_A, Provatidis_C

Computer Methods in Applied Mechanics and Engineering, Nov

1988, Vol.71, No.2, pp.151-165

(41) Boundary element formulation for sound field problems.

Kagami_S, Fukai_I

Electronics & Communications in Japan, Part 1: Communications

(English translation of Denshi Tsushin Gakkai Ronbunshi), Sep

1988, Vol.71, No.9, pp.9-15

(42) Numerical methods for passive components.

Sorrentino_R

IEEE MTT-S International Microwave Symposium Digest, 1988,

No.1988., pp.619-622

(43) Computer-aided design system for compression mold heating.

Forcucci_SJ, Kwon_TH

American Society of Mechanical Engineers, Production

Engineering Division (Publication) PED, 1988, Vol.32, pp.273-

284

(44) Computer-aided cooling-line system for injection molds.

Turng_LS, Wang_KK

American Society of Mechanical Engineers, Production

Engineering Division (Publication) PED, 1988, Vol.32, pp.201-

214

(45) Analysis of flux concentration phenomena in eddy-current type

A.C. high magnetic field generator.

Enokizono_M, Todaka_T, Kagawa_R, Bessho_K, Yamada_S,

Minamitani_T

IEEE Translation Journal on Magnetics in Japan, Mar 1988,

Vol.3, No.3, pp.253-262

(46) Boundary element method taking into account external power

source.

Enokizono_M

IEEE Transactions on Magnetics, Jul 1988, Vol.24, No.4,

pp.2133-2139

(47) Materialtechnische Aspekte bie der Vorbereitung und Ausfuehrung

eines umfassenden Konzeptes der Wiederverwendung von Baustoffen

im Strassenbau.

Technology of materials aspects in the planning and

implementation of a grand concept of recycling road building

materials.

Bellin_P, Tappert_A

Strasse und Autobahn, Aug 1988, Vol.39, No.8, pp.300-306

(48) Boundary integral equation analysis for steady thermoelastic

problems using thermoelastic potential.

Koizumi_T, Tsuji_T, Takakuda_K, Shibuya_T, Kurokawa_K

Journal of Thermal Stresses, 1988, Vol.11, No.4, pp.341-352

(49) Improvement of the accuracy in BEM, based on the similarity of

stress fields near notch roots (2nd report, application to the

three-dimensional stress concentration problems).

Nisitani_H, Higashimachi_T, Noguchi_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Oct 1988, Vol.54,

No.506, pp.1868-1871

(50) Three-dimensional unsteady thermal stress analyses by means of

the thermoelastic displacement potential and the boundary

element method.

Ochiai_Y, Ishida_R, Sekiya_T

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Oct 1988, Vol.54,

No.506, pp.1847-1850

(51) Application of the boundary element method to the inverse

problem of heat conduction.

Shoji_M, Ono_N

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Oct 1988, Vol.54,

No.506, pp.2893-2900

(52) BEM-FEM coupling analysis of the two-dimensional elastic wave

field in steady state.

Uesugi_S, Ohtsu_M

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Oct 1988, No.398 pt I-10, pp.295-301

(53) Behaviour of boundary element solutions in the neighborhood of

the boundary in two dimensional elastostatic problems.

Abe_K

Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society

of Civil Engineers, Oct 1988, No.398 pt I-10, pp.207-216

(54) Die design by a boundary element method.

TranCong_T, PhanThien_N

Journal of Non-Newtonian Fluid Mechanics, Oct 1988, Vol.30,

No.1, pp.37-46

(55) Three-dimensional analysis for tunnels in an elastic half-space

with boundary integral equation method.

Yeh_CS, Huang_TH

Chung-kuo Kung Ch'eng Hsueh K'an/Journal of the Chinese

Institute of Engineers, Sep 1988, Vol.11, No.5, pp.505-517

(56) Widerstands-Extraktion aus dem Masken-Layout Integrierter

Schaltungen durch Anwendung der Randelemente-Methode.

Resistance extraction from IC mask descriptions by the boundary

element method.

Schwaferts_A

AEU, Archiv fuer Elektronik und Uebertragungstechnik:

Electronics and Communication, Sep-Oct 1988, Vol.42, No.5,

pp.296-308

(57) New approach for the bending problem of shallow shell by the

boundary element method.

Ye_J

Applied Mathematical Modelling, Oct 1988, Vol.12, No.5, pp.467-

470

(58) Improved streamline-generating technique that uses the boundary

(integral) element method.

Numbere_DT, Tiab_D

SPE Reservoir Engineering (Society of Petroleum Engineers), Aug

1988, Vol.3, No.3, pp.1061-1068

(59) Prediction of the probability of eddy current flaw detection.

Beissner_RE, Fisher_JL, Bartels_KA

Review of Progress in Quantitative Nondestructive Evaluation,

1988, Vol.7B, pp.1753-1760

(60) Acoustic emission from macro-microcrack configurations.

Zhang_C, Achenbach_JD

Review of Progress in Quantitative Nondestructive Evaluation,

1988, Vol.7B, pp.1513-1519

(61) 3-D ultrasonic scattering from planar cracks by the boundary

element method.

Budreck_DE, Achenbach_JD

Review of Progress in Quantitative Nondestructive Evaluation,

1988, Vol.7A, pp.103-111

(62) Acoustic scattering by elastic solids using the boundary

element method.

Goswami_P, Rizzo_FJ, Shippy_DJ

Review of Progress in Quantitative Nondestructive Evaluation,

1988, Vol.7A, pp.95-102

(63) Mathematical modelling for estimation of minewater inflow to a

surface mining operation.

Singh_RN, Reed_SM

International Journal of Mine Water, Sep 1988, Vol.7, No.3,

pp.1-33

(64) Comparison of dynamic stiffnesses of rigid square and

rectangular foundations dy DBEM and IBEM.

Ahmad_S, Israil_ASM, Chen_K

International Journal for Numerical and Analytical Methods in

Geomechanics, Nov-Dec 1988, Vol.12, No.6, pp.657-678

(65) Boundary element reservoir model for seismic analysis of

gravity dams.

Humar_JL, Jablonski_AM

Earthquake Engineering & Structural Dynamics, Nov 1988, Vol.16,

No.8, pp.1129-1156

(66) Plane strain soil-structure interaction model.

Dangla_P

Earthquake Engineering & Structural Dynamics, Nov 1988, Vol.16,

No.8, pp.1115-1128

(67) On the computation of two-dimensional stress intensity factors

using the boundary element method.

Jia_ZH, Shippy_DJ, Rizzo_FJ

International Journal for Numerical Methods in Engineering, Dec

1988, Vol.26, No.12, pp.2739-2753

(68) Boundary element method for bonded tri-layer planes and its

application.

Dai_C, Tong_G

Mining Science & Technology, Oct 1988, Vol.7, No.3, pp.295-303

(69) Mechanical and thermal characteristics in cold rolling by using

drawing type rolling mill.

Sukumoda_S, Kihara_J, Aizawa_T

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of

Japan, Oct 1988, Vol.74, No.10, pp.1970-1977

(70) Point concerning quadratic elements in two-dimensional boundary

element methods.

Deb_A, Wang_HC

Communications in Applied Numerical Methods, Nov-Dec 1988,

Vol.4, No.6, pp.821-823

(71) Analysis of stress intensity factors for surface cracks in

pre/post penetration.

Miyoshi_T, Yoshida_Y

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Sep 1988, Vol.54,

No.505, pp.1771-1777

(72) Application of the boundary element method to bolted connection

(3rd report, stress analysis of T-flange using melan's

solution).

Tanaka_M, HorieShinji

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Aug 1988, Vol.54,

No.504, pp.1904-1910

(73) Application of projection methods to wing theory.

Voyevodin_AV, Sudakov_GG

Fluid Mechanics, Soviet Research, May-Jun 1988, Vol.17, No.3,

pp.68-79

(74) New numerical analysis for oversized planar waveguide circuits.

Iterative method by use of a boundary element source matrix.

Wada_O, Nakajima_M

Electronics & Communications in Japan. Part II: Electronics,

Jun 1988, Vol.71, No.6, pp.83-94

(75) Isoparametric boundary solution for thermal radiation.

Keavey_MA

Communications in Applied Numerical Methods, Sep-Oct 1988,

Vol.4, No.5, pp.639-646

(76) Boundary elements for non-linear heat conduction problems.

Wrobel_LC, Brebbia_CA

Communications in Applied Numerical Methods, Sep-Oct 1988,

Vol.4, No.5, pp.617-622

(77) Prediction of potential and current density in galvanic

corrosin and cathodic protection systems.

Aoki_S, Kishimoto_K, Miyasaka_M

Zairyo/Journal of the Society of Materials Science, Japan, Jul

1988, Vol.37, No.418, pp.757-762

(78) Elasto-plastic stress analysis of rock cavern under bi-axial

stress condition: Elasto-plastic analysis of rock caverns by a

coupled boundary element-characteristics method (1st report).

Sugawara_K, Aoki_T, Suzuki_Y

Nippon Kogyo Kaishi/Journal of the Mining and Metallurgical

Institute of Japan, May 1988, Vol.104, No.1203, pp.261-266

(79) Boundary element analysis of sound fields around enclosures

with circular apertures.

Nishida_K, Fujitsuka_K

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan

Society of Mechanical Engineers, Part C, Jun 1988, Vol.54,

No.502, pp.1268-1273

(80) Pressure on lining due to initial stress field by finite-

infinite-interface element method.

Kumar_P, Singh_B

Rock Mechanics and Rock Engineering, Jul-Sep 1988, Vol.21,

No.3, pp.219-228

(81) Boundary only procedure for time-dependent diffusion equations.

Aral_MM, Tang_Y

Applied Mathematical Modelling, Dec 1988, Vol.12, No.6, pp.610-

618

(82) Extension of the CVBEM to higher-order trial functions.

Hromadka_TVI, Yen_CC

Applied Mathematical Modelling, Dec 1988, Vol.12, No.6, pp.619-

626

(83) Acoustic modelling in design.

McCulloch_C

Noise & Vibration Control Worldwide, Sep 1988, Vol.19, No.8,

pp.224-225

(84) Standard Helmholtz integral equation calculations near

characteristic frequencies.

Hall_WS, Robertson_WH

Journal of Sound and Vibration, Oct 22 1988, Vol.126, No.2,

pp.367-368

(85) Ground motions resulting from a pressurized buried cavity.

Manolis_GD, Ahmad_S

Wave Motion, Oct 1988, Vol.10, No.5, pp.465-478

(86) Einflussgroessen bie der energetischen Optimierung

pneumatischer Dichtstrom-Foerderanlagen.

Influencing variables in the energy optimization of dense-phase

pneumatic conveying systems.

Hilgraf_P

ZKG International, Edition B, Aug 1988, Vol.41, No.8, pp.374-

380

(87) Solution of the resonant frequencies of a microwave dielectric

resonator using boundary element method.

Geyi_W, Hongshi_W

IEE Proceedings, Part H: Microwaves, Antennas and Propagation,

Oct 1988, Vol.135, No.5, pp.333-338

(88) Elasto-plastic deformation of a circular opening under bi-axial

stress condition - elasto-plastic of rock caverns by a coupled

boundary element-characteristics method (2nd report).

Aoki_T, Sugawara_K, Obara_Y, Suzuki_Y

Nippon Kogyo Kaishi/Journal of the Mining and Metallurgical

Institute of Japan, Aug 1988, Vol.104, No.1206, pp.489-494

(89) Analysis of an elastic contact problem by applying the boundary

element method (an approach using the penalty function method).

Yamazaki_K, Mori_M

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Aug 1988, Vol.54,

No.504, pp.1629-1635

(90) BEM analysis of a cylindrical three point bend specimen with a

chevron crack for fracture toughness test of rock.

Hayashi_K, Ono_A, Abe_H

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Aug 1988, Vol.54,

No.504, pp.1541-1545

(91) Calculation of the effective thermal conductivity of media with

regularly dispersed parallel cylinders.

Oshima_N, Watari_N

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan

Society of Mechanical Engineers, Part B, Aug 1988, Vol.54,

No.504, pp.2144-2149

(92) Stauchen von Normteilen Aus Hochfestem Kaltstauchstahl.

Upsetting of standard parts from high strength cold upsetting

steel.

Lehnert_W, Rudolph_H

Neue Huette, Aug 1988, Vol.33, No.8, pp.309-312

(93) Effect of material constant and specimen size on residual

stress - residual stress in bonded dissimilar materials (part

II).

Terasaki_T, Hirai_T, Seo_K

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding

Society, May 1988, Vol.6, No.2, pp.88-92

(94) Advanced application of BEM to wave barriers in multi-layered

three-dimensional soil media.

Banerjee_PK, Ahmad_S, Chen_K

Earthquake Engineering & Structural Dynamics, Oct 1988, Vol.16,

No.7, pp.1041-1060

(95) On the discretization of an object by the boundary element

method in 2-D elastostatics.

Sawada_T, Ye_GW

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jul 1988, Vol.54,

No.503, pp.1359-1364

(96) Stress concentrations of a finite solid cylinder with a form of

a test piece specimen under torsion.

Hasegawa_H, Iwata_K, Kondou_K

Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan

Society of Mechanical Engineers, Part A, Jul 1988, Vol.54,

No.503, pp.1335-1340

(97) Application of the method of boundary integral equation to

numerical solution of volumetric problems of nonlinear fracture

mechanics.

Makhutov_NA, Petushkov_VA, Zysin_VI

Problemy Prochnosti, Jul 1988, No.7, pp.3-8

(98) Dynamics of linear elastic structures with selfstress: a

unified treatment for linear and nonlinear problems.

Irschik_H, Ziegler_F

Zeitschrift fuer Angewandte Mathematik und Mechanik, 1988,

Vol.68, No.6, pp.199-205

(99) Direct boundary element method for plane strain poroelasticity.

Cheng_AHD, Detournay_E

International Journal for Numerical and Analytical Methods in

Geomechanics, Sep-Oct 1988, Vol.12, No.5, pp.551-572

(100) Boundary element method for Kirchhoff type plate bending

problems by regular integration technique.

Lu_X, Du_Q

Ching Hua Ta Hsueh Hsueh Pao/ Journal of Ching Hua University,

1988, Vol.28, No.2, pp.12-22

(101) Elastoplastic analysis by the coupling of boundary element

method to finite element method.

Cen_Z, Wang_X, Du_Q

Ching Hua Ta Hsueh Hsueh Pao/ Journal of Ching Hua University,

1988, Vol.28, No.2, pp.34-43

(102) Second kind of boundary integral equation.

Liu_G, Lin_C

Ching Hua Ta Hsueh Hsueh Pao/ Journal of Ching Hua University,

1988, Vol.28, No.2, pp.61-72

(103) Meranie dynamickeho koeficientu intenzity napati pri narazovom

zatazeni.

Measurement of dynamic stress intensity factor under impact

loading.

Balas_J, Drzik_M, Sladek_J, Sladek_V

Stavebnicky Casopis, May 1988, Vol.36, No.5, pp.361-371

(104) Calculation of the temperature field of 300MW turbine rotor

using boundary element method.

Zheng_X

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese

Society of Electrical Engineering, Jul 1988, Vol.8, No.4,

pp.27-38

(105) New BEM formulation for two- and three-dimensional

elastoplasticity using particular integrals.

Henry_DP_Jr, Banerjee_PA

International Journal for Numerical Methods in Engineering, Sep

1988, Vol.25, No.9, pp.2079-2096

(106) New boundary element formulation for two- and three-dimensional

thermoelasticity using particular integrals.

Henry_DP_Jr, Banerjee_PK

International Journal for Numerical Methods in Engineering, Sep

1988, Vol.25, No.9, pp.2061-2077

(107) Shape optimization using the boundary element method with

substructuring.

Sandgren_E, Wu_SJ

International Journal for Numerical Methods in Engineering, Sep

1988, Vol.25, No.9, pp.1913-1924